Trace/Frig. [RE-wrenches]

[Sharkey]

	Hi Kurt;

	Don't know if this is related, but I had some problems with a Trace 812
waking up when a load that used an SCR controller was connected while it
was asleep. My solution was to sent the Trace an 'on' command via the
remote port when I wanted to wake it up to power the load. Perhaps the
U2512 is having a similar problem? You didn't mention whether the U2512was
in the sleep mode when this happens, but your reference to an incandescent
light makes me wonder?

	-S
- - - - - - -
To send a message to the list use: <RE-wrenches at topica.com>

To view an archive of previous messages go to: <http://www.topica.com/lists/RE-wrenches/

To unsubscribe send an email message to: <RE-wrenches-unsubscribe at topica.com>

Hosted by Home Power magazine: <http://www.homepower.com>

for info contact: <michael.welch at homepower.com>
_____________________________________________________________
Want to find the best email lists? Check out the Topica 20!
http://www.topica.com/topica20