Generator Fuel Rules of Thumb [RE-wrenches]

[Don Loweburg, Offline]

In a message dated 06/01/2000 6:02:52 PM Pacific Daylight Time, 
ozsolar at ipa.net writes:

<< I have a customers spec. sheet on a Propane Kohler 11RMY that gives
 99cfh at full load.  It includes the conversion factor of gal/hr=cfh/154.3. 
 The math says .64 gallons per hour but I thinking that is low.
  >>
I think it is a little low. Maybe somewhere around a gal per hour for a 
genset that size.

Don Loweburg
- - - - - - -
To send a message to the list use: <RE-wrenches at topica.com>

To view an archive of previous messages go to: <http://www.topica.com/lists/RE-wrenches/

To unsubscribe send an email message to: <RE-wrenches-unsubscribe at topica.com>

To check out who the other RE-Wrench participants are, go to <http://www.mrsharkey.com/wrenches/>

Hosted by Home Power magazine: <http://www.homepower.com>

for info contact: <michael.welch at homepower.com>
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics