<div dir="ltr"><div>With regards to ground mount conductors entering a building to the inverter and batteries inside.  It doesn&#39;t make any sense to require RSD, because RSD is about array safety and we&#39;ve agreed that for a ground mount the RSD requirement does not apply.  A disconnect switch has always been an acceptable means of shutting down conductors -- whether from a PV array, the grid, a generator, or other power source.  So why would a disconnect not suffice in this case, rather than putting RSD on the array.   Not saying that&#39;s what the code says... but logically, the intent of RSD for conductor safety could be met with a disconnect switch where they enter the building, it seems.</div><br><div><br clear="all"></div><br><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div><div dir="ltr">Zeke Yewdall<div>PV Engineer</div><div>NABCEP #031508-89</div><div><a href="mailto:zeke@darkforestsolar.com" target="_blank">zeke@darkforestsolar.com</a></div><div>303-523-3592</div></div></div></div></div></div>