<div dir="ltr"><div>FWIW, I have some evault classics running in parallel with a hacked ReLion/Iron Edison battery (it had a BMS failure and the BMS was replaced with a JKBMS).   I have victron smarthshunts on each battery, connected to a cerbo, so I can track how all the different batteries are sharing.  So far, one of the evaults tracks along very well with the ReLion -- the Evault contributing a tad more current (it&#39;s a 360AH vs the 300A ReLion).  The other evault has something wrong (haven&#39;t gotten out to the site yet with the fortress tool to talk to its BMS, but it&#39;s acting like a bad cell perhaps -- only showing about half the capacity as the good one).  But the good one and the ReLion track very well with each other every day.  It&#39;s all open loop with some SolArk 12k inverters.  It gets up to 55.6 every day for a few minutes, then floats at 54.3 or so for the rest of the day.  Been operating like this for two months or so now.   So.... while I&#39;m sure that it&#39;s not recommended practice, it does seem to work to parallel two different 16 cell batteries... </div><div><br></div><div>Zeke</div><div><br></div></div>