<div dir="auto">I was contacted by a homeowner with a bunch of spr-x21-350-blk-d-ac that were removed for roof replacement right around the time that SunPower went bankrupt. All the cabling is missing, and I&#39;m not sure if the monitoring system is even viable anymore. <div dir="auto"><br></div><div dir="auto">Any suggestions for how to handle this? I think the IQ8X microinverter might be compatible and the DC leads from the panel might be long enough if I frame mount the microinverter or carefully position microinverters on the rail.</div><div dir="auto"><br></div><div dir="auto">The other issue I have is all of the proprietary clamps for these panels are missing. Can these panels be top clamped with standard UFO or other mid clamps? </div><div dir="auto"><br></div><div dir="auto">I have been helping quite a few people get systems with SunPower branded Enphase microinverters converted over to the Enlighten monitoring portal, but I am not familiar with the microinverters on the spr-x21-350-blk-d-ac.</div><div dir="auto"><br></div><div dir="auto">Jason Szumlanski </div><div dir="auto">Florida Solar Design Group </div></div>