<div dir="ltr"><div>Hey Jason,</div><div>I think I can confirm a couple of things, but I'll include the spec sheet for you as well.</div><div>That micro is just a white labeled Enphase. Believe it or not they are still being installed today.</div><div>So if it's the same module I think it is, you can install them just like normal. However, the tricky part is module thickness, you can't use the new Ironridge stopper sleeve and you have to find the matching stopper sleeve to go with a UFO that supply has dwindled on. I haven't found any other mids and ends to accommodate. I know Pegasus is working on it.</div><div>Hope this helps.</div></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Fri, Feb 21, 2025 at 9:11\u202fAM Jason Szumlanski via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">I was contacted by a homeowner with a bunch of spr-x21-350-blk-d-ac that were removed for roof replacement right around the time that SunPower went bankrupt. All the cabling is missing, and I'm not sure if the monitoring system is even viable anymore. <div dir="auto"><br></div><div dir="auto">Any suggestions for how to handle this? I think the IQ8X microinverter might be compatible and the DC leads from the panel might be long enough if I frame mount the microinverter or carefully position microinverters on the rail.</div><div dir="auto"><br></div><div dir="auto">The other issue I have is all of the proprietary clamps for these panels are missing. Can these panels be top clamped with standard UFO or other mid clamps? </div><div dir="auto"><br></div><div dir="auto">I have been helping quite a few people get systems with SunPower branded Enphase microinverters converted over to the Enlighten monitoring portal, but I am not familiar with the microinverters on the spr-x21-350-blk-d-ac.</div><div dir="auto"><br></div><div dir="auto">Jason Szumlanski </div><div dir="auto">Florida Solar Design Group </div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>