<div dir="ltr">Its actually
the alumium flange that is typically tapped into the microinverter plastic housing that I'm after (the part that is attached to the rail during installation). In this case, the micros were in held a plastic bracket that was glued onto the module backsheet and so the standard mounting flange wasn't part of the set up. This is certainly a disadvantage of an AC module... </div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Feb 23, 2023 at 11:13 AM William Miller via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div class="msg-2425348940278489293"><div lang="EN-US"><div class="m_-2425348940278489293WordSection1"><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)">Mac:</span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)">Maybe the SnapnRack MLPE flange kit is what you need?</span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"><a href="https://snapnrack.com/wp-content/uploads/2019/07/SNR_MLPE-Frame-Attachment-Kit-Installation-Manual_v.1.1.pdf" target="_blank">https://snapnrack.com/wp-content/uploads/2019/07/SNR_MLPE-Frame-Attachment-Kit-Installation-Manual_v.1.1.pdf</a></span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)">William</span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)">Miller Solar</span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)">17395 Oak Road, Atascadero, CA 93422</span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)">805-438-5600</span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)"><a href="http://www.millersolar.com/" target="_blank">www.millersolar.com</a></span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)">CA Lic. 773985</span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:Calibri,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><b><span style="font-size:10pt;font-family:Tahoma,"sans-serif"">From:</span></b><span style="font-size:10pt;font-family:Tahoma,"sans-serif""> RE-wrenches [mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>] <b>On Behalf Of </b>Mac Lewis via RE-wrenches<br><b>Sent:</b> Thursday, February 23, 2023 9:56 AM<br><b>To:</b> RE-wrenches<br><b>Cc:</b> Mac Lewis<br><b>Subject:</b> [RE-wrenches] Enphase ACM to rail mount plate</span></p><p class="MsoNormal"> </p><div><p class="MsoNormal">Hello Wrenches,</p><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">We are in the middle of planning for a full solar panel replacement at a house with AC modules. It was a Solaria 355 with an Enphase IQ7+. Solaria is going to replace the modules with a standard module, not an AC module (MC4 cabling not an Q Cable to J-box). This seems OK but the issue is the that microinverters don't have an integrated plate to mount to the existing rail. </p></div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">I've talked with Enphase and it doesn't appear that they are willing to sell us this mounting flange plate (or it could have been too unusual for this particular tech support contact to deal with). Im sure I can fab up something, but curious if anyone has dealt with this? Or has a good contact at enphase that might be able to help with this unusual request.</p></div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">Thanks in advance!<br clear="all"></p><div><p class="MsoNormal"> </p></div><p class="MsoNormal">-- </p><div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal"> </p></div><p class="MsoNormal" style="margin-bottom:12pt">Mac Lewis<b><span style="font-family:Arial,"sans-serif";color:rgb(255,153,0)"></span></b></p><p><span style="color:rgb(48,90,120)">"Yo solo sé que no sé nada." </span><b><span style="color:rgb(104,104,104)">-Sócrates</span></b><b><span style="font-family:Arial,"sans-serif";color:rgb(255,153,0)"></span></b></p></div></div></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</div></blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature"><div><br></div><div><font color="#305A78" face="'times new roman', serif"><br></font></div><div><br></div>Mac Lewis<br><br><span style="font-family:"Times New Roman";font-size:medium;color:rgb(255,153,0)"><b><font face="Arial, Helvetica, sans-serif" size="3"><p align="left"><font color="#000000" face="Verdana, Arial, Helvetica, sans-serif"><span style="font-size:small"><span style="font-family:arial;font-weight:normal;color:rgb(48,90,120)"><font face="'times new roman', serif">"Yo solo sé que no sé nada." </font><span style="font-weight:700;color:rgb(104,104,104)"><font face="'times new roman', serif">-Sócrates</font></span></span></span></font></p></font></b></span></div>