<div dir="auto">Matt, I have several systems with the same mix working ok except that the low battery cutoff can\u2019t be set high enough to shut down the inverter before the BMS shuts off the battery. Have had to manually restart the batteries. Problem only occurs if generator doesn\u2019t start as programmed or manually started. I install an iota 48v charger wired into the dc bus to jump start the system in worst case scenario where charge controllers are also shut down and generator can feed in bypass mode to provide a hot outlet for the IOTA. The IOTA charger also serves as a small backup generator input pathway without having to change any charger settings in the inverter.</div><div dir="auto"><br></div><div dir="auto">John B </div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Jun 10, 2022 at 7:08 AM Matt Sherald via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Hello Wrenches,</div><div><br></div><div>I've got customers with an ailing battery bank and I'm working to sketch out a replacement plan. I'd like to offer them a Li option, but they have a suite of older electronics and I'm writing to ask the list if anyone feels like they've settled on a Li brand that works well with pre-Li electronics. Glad for any suggestions. Thanks in advance! <br></div><div><br></div><div>The bank size is currently 1,110Ah/48V. The following electronics are installed:<br></div><div>2008 OB VFX</div><div>2012 OB VFX</div><div>
2008 OB MX60
</div><div>2012 MS Classic X2</div><div><br></div><div>2008 OB Mate</div><div>2010 Trimetric</div><div><br></div><div>-Matt<br></div><div><br></div><div>-- <br><div dir="ltr" data-smartmail="gmail_signature"><div dir="ltr"><div><div><div>Matt Sherald<br></div>PIMBY Energy, LLC<br></div><div></div><div>304-704-5943<br><br></div><span><a href="http://www.getpimby.blogspot.com" target="_blank">www.getpimby.blogspot.com</a><br></span><a href="http://www.getpimby.com" target="_blank">www.getpimby.com</a><br></div><br></div></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div>