<div dir="ltr"><div class="gmail_default" style="font-family:times new roman,serif;font-size:large">yes, there are three versions of the cybo inverter, the one that I a most familiar with produced a 60 HZ AC signal; the voltage did not exceed 120 volts or 240 volts. The voltage out times the current out was equal to the voltage in times current in. This allowed me to operate a resistance load, like a water heater. </div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Apr 16, 2022 at 2:39 PM Glenn Burt via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div>
<div style="font-size:10pt"><div dir="auto">Take a look at Cybo inverters</div><div dir="auto"><br></div><div><div dir="auto">-Glenn</div><div dir="auto">Sent from my 'smart'phone, so please excuse typos and spelling errors.</div></div></div><div style="font-size:10pt"><div id="gmail-m_3129410759552705571LGEmailHeader" dir="auto"><div dir="auto"><br></div><div dir="auto">------ Original message------</div><div dir="auto"><b>From: </b>petertor--- via RE-wrenches<u></u><u></u></div><div dir="auto"><b>Date: </b>Sat, Apr 16, 2022 12:49 PM</div><div dir="auto"><b>To: </b><a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>;</div><div dir="auto"><b>Cc: </b><a href="mailto:petertor@pobox.com" target="_blank">petertor@pobox.com</a>;</div><div dir="auto"><b>Subject:</b>[RE-wrenches] Is There an "Off-grid" (i.e. constant voltage) Version of
Microinverters?</div><div dir="auto"><br></div></div><div dir="auto">
<div>
It has been a while since I installed a PV system, so I apologize in advance for my ignorance wrt product availability.
</div>
<div>
<br>
</div>
<div>
I recently had need for the off-grid equivalent of a grid-tied microinverter. I have an assortment of new and not so new PV modules such as the Solaria mono, 400 Wp and the Jinko poly, 310 Wp. I would like a microinverter that makes available 120 Vac (or 240 Vac but 120 is preferable), 60 Hz. I would then take the output of these microinverters and combine them in a subpanel. I do not have a need for battery storage.
</div>
<div>
<br>
</div>
<div>
I can explain more about the application to anyone who has an interest.
</div>
<div>
<br>
</div>
<div>
Does
such an component exist?
</div>
<div>
<br>
</div>
<div>
Thanks in advance for any help.
</div>
<div>
<br>
</div>
<div>
- Peter
</div>
<div>
<p>Peter T. Parrish, Ph.D.<br>President, California Solar Engineering<br>1107 Fair Oaks Blvd Ste. 351<br>South Pasadena, CA 91030<br><a href="tel:(323)%20839-6108" target="_blank">(323) 839-6108</a><br></p>
</div>
</div></div>
</div>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>