<div dir="ltr">I feel the same way about the Outback Radian GSLC box, once it's fully wired there's no room whatsoever, and sometimes you have to remove breakers and layers of wiring to re-access things for debug. Don't know how it meets code and ETL approval for wire space.<br><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Apr 14, 2022 at 11:20 AM Jason Szumlanski via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto"><div>This problem is not limited to one manufacturer. One example is the Enphase smart controller. While the small holes are big enough for #6 ground and neutral, you have to strip the wires perfectly and have the hand of a heart surgeon to get them in there. And conduit entry is a royal pain because the enclosure is tapered on the bottom and sides.</div><div dir="auto"><br></div><div dir="auto">Fortunately, all of these manufacturers seem to be making strides to make the roof installation easier. A little more attention to the electrical enclosures would be appreciated. </div><div dir="auto"><br></div><div dir="auto">Jason Szumlanski</div><div dir="auto"><br></div><div dir="auto"><br><br><div class="gmail_quote" dir="auto"><div dir="ltr" class="gmail_attr">On Thu, Apr 14, 2022, 10:30 AM Dana Orzel via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">We have done one Solark installation & I was shocked as to the lack of ground wire landing terminals & space. We added a 12126 metal box below to ease the # of entrances to two 11/4\u201d.<div> I jumpered a # 8 to a second ground bar to allow for additional landing locations. I called Solark to question this & the response to the question was \u201cyeah we have heard this from other installers \u201c.<br>End of call. <br><div dir="ltr">Dana Orzel<div>C: 208.721.7003<div>E- <a href="mailto:dana@solarwork.com" rel="noreferrer" target="_blank">dana@solarwork.com</a></div></div></div><div dir="ltr"><br><blockquote type="cite">On Apr 13, 2022, at 8:21 PM, Maverick Brown via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr">\ufeffRon<div><br></div><div>The Sol-Ark has two MPPT channels and has two separate landing spots for each MPPT channels. Each landing pair needs matching strings. 8 AWG wire barely fits so the Sol-Ark PV terminals so they may only be rated for 10AWG. </div><div><br></div><div>I\u2019m assuming you have a ground array The most common stringing method would be to use a trench with conduit and THHN wire. You could also sleeve a direct-burial cable into the ground. Calculate the voltage drop over the distance to make sure 10AWG is adequate. If not, then make a junction, like a MidNite or Outback combiner or an IMO switch at the array to get up the right wire size, with an added MidNite Surge Protector or EMP shield device. If it\u2019s a long distance (larger wire size), add another combiner at the inverter building entrance to get back to 10 AWG. </div><div><br></div><div><a href="https://practicalpreppers.com/product/imo-4-pole-16-amp-dc-disconnect/" rel="noreferrer" target="_blank">https://practicalpreppers.com/product/imo-4-pole-16-amp-dc-disconnect/</a></div><div><br></div><div>Also, The Sol-Ark sizing guide helps with string calculations. </div><div><br></div><div><a href="https://www.sol-ark.com/solar-panel-sizing/SolarPanelSizing.html" rel="noreferrer" target="_blank">https://www.sol-ark.com/solar-panel-sizing/SolarPanelSizing.html</a></div><div><br></div><div>Contact me off list with additional questions. </div><div><br></div><div><br><br><div dir="ltr"><div style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px"><div>Maverick Brown<br>Off-Grid Solar Commander since 2006<br><b>Maverick Solar Enterprises, Inc.</b></div><div><b> \u2022 Solar Commander Remote Power</b></div><div><b> \u2022 SunFlow Systems Cathodic Protection <br></b><a href="mailto:maverick@mavericksolar.com" rel="noreferrer" target="_blank">maverick@mavericksolar.com</a><br>512-460-9825</div><div><br></div></div></div><div dir="ltr"><br><blockquote type="cite">On Apr 12, 2022, at 9:42 PM, Ron Young via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr">\ufeffHi Wrenches, trying to wrap my head around a first time Sol-Ark install. Because the max DC voltage is 500v at 18a and the PV I\u2019m using is 40v DC each I will have to create three strings each 480v. What would be the best choice for a home run wire? I\u2019ve always used smaller strings with micro inverters, a combiner at the array and a single Teck home run cable but the string inverter presents a different scenario and it looks like I\u2019ll need to use three home run cables, one for each string. <div><br></div><div>Ron Young</div><div><br></div><div><div style="color:rgb(0,0,0);font-variant-caps:normal;letter-spacing:normal;text-align:start;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px">earthRight Products - <a href="http://Solareagle.com" rel="noreferrer" target="_blank">Solareagle.com</a><br>Alternative Energy Solutions ~ Renewable Energy Products<br><br><br></div></div><span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a></span><br><span></span><br><span>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a></span><br><span></span><br><span>Change listserver email address & settings:</span><br><span><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a></span><br><span><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>List rules & etiquette:</span><br><span><a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a></span><br><span></span><br><span>Check out or update participant bios:</span><br><span><a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a></span><br><span></span><br></div></blockquote></div><span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a></span><br><span></span><br><span>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a></span><br><span></span><br><span>Change listserver email address & settings:</span><br><span><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a></span><br><span><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>List rules & etiquette:</span><br><span><a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a></span><br><span></span><br><span>Check out or update participant bios:</span><br><span><a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a></span><br><span></span><br></div></blockquote></div></div>_______________________________________________<br><br>
</blockquote></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr"><div dir="ltr"><p class="MsoNormal" style="color:rgb(0,0,0);font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt"><a name="m_-5146957525433189612_SignatureSanitizer__MailAutoSig"><b>Kirk Herander / </b></a><b><a href="mailto:kirkh@vermont.solar" title="Send an email to kirkh@vermont.solar; Send an email to kirkh@vermont.solar" style="color:blue" target="_blank">kirkh@vermont.solar</a></b></span></p><p class="MsoNormal" style="color:rgb(0,0,0);font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt"><b>Owner|Principal, VT Solar, LLC</b></span></p><p class="MsoNormal" style="color:rgb(0,0,0);font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt"><b><i>Celebrating our 31<sup>st</sup> Anniversary 1991-2022!!</i></b></span></p><p class="MsoNormal" style="color:rgb(0,0,0);font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt"><a href="https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636842843233477645&sdata=0NjyuKeQbEK6245SNnk8X4XnP9Q%2B%2BqtvcALkdDghvk4%3D&reserved=0" title="Click to open in a new window or tab
https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb...; Click to open in a new window or tab
https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb..." target="_blank"><b><span style="color:blue">www.vermont.solar</span></b></a><b></b></span></p><p class="MsoNormal" style="color:rgb(0,0,0);font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt">dba Vermont Solar Engineering</span></p><p class="MsoNormal" style="color:rgb(0,0,0);font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt">802.863.1202</span></p></div></div></div>