<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto">I would say it\u2019s likely okay, but to speak in the vernacular, \u201cwatch out sucka\u201d. <div><br></div><div>Vmp will be lower due to temperature coefficient, dirt on the panels and degradation over time. But, the inverter likely wakes up above the minimum Vmp as Voc has the voltage but the inverter can track below minimum Vmp after it wakes up and starts tracking. How far below official Vmp can it track? 18-58 is the tracking range. Inverter technical specs:</div><div><br></div><div><a href="https://www4.enphase.com/sites/default/files/IQ7A-DS-EN-US.pdf">https://www4.enphase.com/sites/default/files/IQ7A-DS-EN-US.pdf</a></div><div><br></div><div>I saw an inverter comparison document but could only find this AU version just now. </div><div><br></div><div><a href="https://www4.enphase.com/sites/default/files/downloads/support/IQ7A_Vs_IQ7plus_in_Australia.pdf">https://www4.enphase.com/sites/default/files/downloads/support/IQ7A_Vs_IQ7plus_in_Australia.pdf</a></div><div><br></div><div><br><br><div dir="ltr"><div class="" style="caret-color: rgb(0, 0, 0); color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; -webkit-text-size-adjust: auto;"><div class="ApplePlainTextBody">Maverick Brown<br>Off-Grid Solar Commander since 2006<br><b>Maverick Solar Enterprises, Inc.</b></div><div class="ApplePlainTextBody"><b> \u2022 Solar Commander Remote Power</b></div><div class="ApplePlainTextBody"><b> \u2022 SunFlow Systems Cathodic Protection <br></b>maverick@mavericksolar.com<br>512-460-9825</div><div class="ApplePlainTextBody"><br></div></div></div><div dir="ltr"><br><blockquote type="cite">On Apr 13, 2022, at 3:57 PM, Drake Chamberlin via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr">\ufeff<span>I'm concerned that a microinverter - module pair that has been specified by a supplier may not work. The maximum power voltage is very close to the minimum starting voltage. The Voc is adequately high.</span><br><span></span><br><span>An Aptos DNA-120-MF26-365W is paired with an Enphase IQ 7A</span><br><span></span><br><span>\u2022 Minimum start voltage of the inverter is 33 V</span><br><span>\u2022 Vmmp of the module is 33.96 V</span><br><span>\u2022 Voc of the module is 40.7 V</span><br><span></span><br><span>Is the 33 V starting voltage going to be a problem with a module STC Max power voltage of 33.96 V? Is it the Voc that determines the starting of the inverter or the Vmmp?</span><br><span></span><br><span>Thanks,</span><br><span></span><br><span>Drake</span><br><span></span><br><span>Drake Chamberlin</span><br><span>Athens Electric LLC</span><br><span>Ohio Electrical Contractor\u2019s License 44810</span><br><span>CO Master Electrician\u2019s License 4526</span><br><span>NABCEP Certified PV Installation Professional</span><br><span></span><br><span></span><br><span>-- </span><br><span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: http://re-wrenches.org</span><br><span></span><br><span>List Address: RE-wrenches@lists.re-wrenches.org</span><br><span></span><br><span>Change listserver email address & settings:</span><br><span>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span>https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</span><br><span>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</span><br><span></span><br><span>List rules & etiquette:</span><br><span>http://www.re-wrenches.org/etiquette.htm</span><br><span></span><br><span>Check out or update participant bios:</span><br><span>http://www.members.re-wrenches.org</span><br><span></span><br></div></blockquote></div></body></html>