<div dir="auto"><div>The VOC will start the microinverter, but I would pair a 365W module with the IQ7+. It depends on where you are and how.much clipping there might be based on temp, orientation, etc. But, the IQ7+ is now in short supply, so you might want to look at the IQ8+.<div dir="auto"><br></div><div dir="auto">I have never had an issue with a module voltage close to the microinverter specified startup voltage. </div><div dir="auto"><div dir="auto"><div dir="auto"><br></div><div dir="auto">Jason Szumlanski </div></div></div><br><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Apr 13, 2022, 4:56 PM Drake Chamberlin via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I'm concerned that a microinverter - module pair that has been specified <br>
by a supplier may not work. The maximum power voltage is very close to <br>
the minimum starting voltage. The Voc is adequately high.<br>
<br>
An Aptos DNA-120-MF26-365W is paired with an Enphase IQ 7A<br>
<br>
\u2022 Minimum start voltage of the inverter is 33 V<br>
\u2022 Vmmp of the module is 33.96 V<br>
\u2022 Voc of the module is 40.7 V<br>
<br>
Is the 33 V starting voltage going to be a problem with a module STC Max <br>
power voltage of 33.96 V? Is it the Voc that determines the starting of <br>
the inverter or the Vmmp?<br>
<br>
Thanks,<br>
<br>
Drake<br>
<br>
Drake Chamberlin<br>
Athens Electric LLC<br>
Ohio Electrical Contractor\u2019s License 44810<br>
CO Master Electrician\u2019s License 4526<br>
NABCEP Certified PV Installation Professional<br>
<br>
<br>
-- <br>
_______________________________________________<br><br>
</blockquote></div></div></div>