<div dir="auto">John:</div><div dir="auto"><br></div><div dir="auto">I have operated FX inverters of different firmware in one system (not FXRs). I was told the newest firmware should be in a lower port but the system worked more reliably with the newer firmware unit in the higher port. May be worth experimenting. Good luck. </div><div dir="auto"><br></div><div dir="auto">William Miller</div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Mar 20, 2022 at 7:14 AM John Blittersdorf <<a href="mailto:john.blittersdorf@gmail.com">john.blittersdorf@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Wrenches, I just added a 2nd VFX3648 stacked as SLAVE L1 to increase charging of his new eVault 18.5 from 12kw Kohler gen. It connects to the generator but doesn\u2019t charge. I read in the manual that both inverters must be the same firmware revision. Once hooked up I found that the added inverter was rev #68 and the original one rev 61. Would it be possible to switch which inverter is the master and have the newer one recognize the older one.? Otherwise is my only option to put a new control board in the original inverter? And possibly also in the new one. Anyone know what the latest rev or last one was?<div dir="auto"><br></div><div dir="auto">John Blittersdorf</div><div dir="auto"><br></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><br>William Miller<br>Miller Solar.com<br>895-438-5600<br><a href="http://www.millersolar.com">www.millersolar.com</a><br></div>