<div dir="ltr">Wrenchers,<div>We have a project on a large property, where the install site has no internet (there is internet much further away on the property, and on a different service) and cell reception is pretty bad. We attempted to use SMA Cell Modem Kits (sunny boy inverters), but couldn&#39;t get a good enough signal for them to work. The client was fine with having just a production meter with no internet based monitoring. Now there is the possibility of expanding the system quite a bit (also with Sunny Boy&#39;s), and I&#39;d prefer to figure out a way to monitor everything from offsite. Has anyone had any success using a third party antenna with the SMA Cell Modem Kits? Or have thoughts on other methods for setting up monitoring where we could, at a minimum, see the combined output of all the inverters? Thanks for any thoughts.</div><div>Adam</div><div><br></div><div><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div>Adam Katzman (he/him)<br>Autonomous Energies | Owner/Operator</div><div dir="ltr"><a href="http://www.autonomousenergies.com" target="_blank">www.AutonomousEnergies.com</a><br>(518) 567-1468<br></div></div><div dir="ltr"><br><br></div></div></div></div></div></div></div></div></div>