<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto">Doesn\u2019t the boot loader start after no code runs? Therefore couldn\u2019t you attempt to upgrade the CC firmware again? That has worked for me in the past. Sometimes I think Xanbus can be delicate and I\u2019ll use the Combox direct to the device being upgraded or use the Setup tool (config tool) direct to the device being updated. <div><br><div dir="ltr"><div class="" style="caret-color: rgb(0, 0, 0); color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; -webkit-text-size-adjust: auto;"><div class="ApplePlainTextBody">Maverick Brown<br>Off-Grid Solar Commander since 2006<br><b>Maverick Solar Enterprises, Inc.</b></div><div class="ApplePlainTextBody"><b> \u2022 Solar Commander Remote Power</b></div><div class="ApplePlainTextBody"><b> \u2022 SunFlow Systems Cathodic Protection <br></b>maverick@mavericksolar.com<br>512-460-9825</div><div class="ApplePlainTextBody"><br></div></div></div><div dir="ltr"><br><blockquote type="cite">On Feb 16, 2022, at 8:09 PM, drake.chamberlin@redwoodalliance.org wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr">\ufeff<span>While trying to update the firmware on a Schneider 600-80 charge controller, it went into bootloader mode and became totally unresponsive. This problem was read from the Gateway on Insight Local. Tech support claimed the CC was bad.</span><br><span></span><br><span>However, the CC is working fine. It shows up on the SCP with no error codes. The only remedy that Schneider is offering is to replace the CC if it is under warranty. It likely is not.</span><br><span></span><br><span>How can a Schneider device be taken out of bootloader mode (if it really is in that mode)? Could it be an error in the Gateway?</span><br><span></span><br><span>Thanks,</span><br><span></span><br><span>Drake</span><br><span></span><br><span>Drake Chamberlin</span><br><span>Athens Electric LLC</span><br><span>Ohio Electrical Contractor\u2019s License 44810</span><br><span>CO Master Electrician\u2019s License 4526</span><br><span>NABCEP Certified PV Installation Professional</span><br><span></span><br><span>-- </span><br><img id="847AF249-CC38-48A2-A5F8-B403D521C80B" src="cid:847AF249-CC38-48A2-A5F8-B403D521C80B"><span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: http://re-wrenches.org</span><br><span></span><br><span>List Address: RE-wrenches@lists.re-wrenches.org</span><br><span></span><br><span>Change listserver email address & settings:</span><br><span>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span>https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</span><br><span>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</span><br><span></span><br><span>List rules & etiquette:</span><br><span>http://www.re-wrenches.org/etiquette.htm</span><br><span></span><br><span>Check out or update participant bios:</span><br><span>http://www.members.re-wrenches.org</span><br><span></span><br></div></blockquote></div></body></html>