<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto">Jay:<div><br></div><div>I often struggle to remember all of the steps required to set up, connect to or configure all of the various equipment I have to deal with, so I am sympathetic. Typically just enough time elapses after a given procedure that I completely forget what I did. What I do is keep notes in my Evernote app and update those notes every time I revisit the procedure. </div><div><br></div><div>Usually I am navigating the SMA setup in order to configure a replacement inverter to not require a neutral. This is because I am replacing a Sunny Boy installed back when a neutral was not required and we did not run one. </div><div><br></div><div>The point I am making is I can share my notes on logging into a 41 series SMA and setting the no-neutral configuration. Those notes are below. They may be relevant to what your friend needs to do. </div><div><br></div><div><div data-pm-slice="1 1 []" data-en-clipboard="true" style="-webkit-text-size-adjust: auto;">For 41 series:</div><ol style="-webkit-text-size-adjust: auto;"><li>Find SMAxxxx WiFi on your device. </li><li>Use password on back of manual or side of connection box to log in to WiFi. </li><li>You will be directed to another sign in. Think password for that is also on manual or you will create one. </li><li>Every time you connect via WiFi you will eventual be directed to interface. It\u2019s slow. Instead easiest access is via 192.168.12.3.</li><li>Log on as installer.</li><li>If no neutral: set country standard to: UL1741/2016/240. Must completely power cycle for settings to take. </li></ol><br><div dir="ltr">William Miller<div><div>www.millersolar.com</div></div></div><div dir="ltr"><br><blockquote type="cite">On Dec 22, 2021, at 6:48 PM, Jay <jay.peltz@gmail.com> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr">\ufeff<span>Does anyone have a go to web site/videos for sma 7.7 wifi set up?</span><br><span>I didn\u2019t find anything on the sma site but could have missed it. </span><br><span></span><br><span>I have a friend trying to set his up and he\u2019s struggling a bit. I figure there is someone who\u2019s got a good set of videos out there </span><br><span></span><br><span>Thanks</span><br><span></span><br><span>Jay</span><br><span></span><br><span>Peltz power. </span><br><span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: http://re-wrenches.org</span><br><span></span><br><span>List Address: RE-wrenches@lists.re-wrenches.org</span><br><span></span><br><span>Change listserver email address & settings:</span><br><span>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span>https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</span><br><span>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</span><br><span></span><br><span>List rules & etiquette:</span><br><span>http://www.re-wrenches.org/etiquette.htm</span><br><span></span><br><span>Check out or update participant bios:</span><br><span>http://www.members.re-wrenches.org</span><br><span></span><br></div></blockquote></div></body></html>