<div dir="auto">I have a client (DIY) who has dual 8048&#39;s and he is starting the generator using both high load and low voltage settings with the AGS. It worked flawlessly for 9 months. Then for a couple of months when the generator shut down the lights would flicker. Eventually it started shutting down his loads completely for a couple of minutes and it would start back up automatically. Now when the generator shuts down the inverters shut down and need to be restarted manually. <div dir="auto"><div dir="auto"><br></div><div dir="auto">He said there is an error code but he never wrote it down.</div><div dir="auto"><br></div><div dir="auto">Any ideas given the sequence of events?</div><div dir="auto"><br></div><div dir="auto">Lead acid batteries. 20kW generator. Despite it being DIY from an online wholesaler, he did hire a licensed electrician and that electrician consulted with me a bit prior to installation, so it&#39;s a pretty good job. I&#39;m thinking it&#39;s an internal Radian setting or fault causing this. </div><div dir="auto"><br></div><div dir="auto">Jason Szumlanski</div><div dir="auto">Florida Solar Design Group</div></div></div>