<div dir="ltr"><font color="#000000">Wrenchers,</font><div><font color="#000000">Some point back we transitioned from polaris lugs to buchanan crimps/caps (doping our wires in noalox) for our jbox splices. I know there have been a few conversations on here about this. Seems like a much more robust connection than anything we have used prior. But now we have an inspector who isn&#39;t in support of using them for outdoor/damp locations. To be fair (although it seems like a far superior connection) Ideal doesn&#39;t have documentation to support outdoor use. I know a lot of folks on here have had solid/long lasting results though. In any event, we may have to transition away from buchanan crimps and wondering what you all recommend as your second (or first) choice? Or if anyone has experience with supporting this application when dealing with inspectors? Do we go back to polaris lugs? I know there was a conversation a while back about failures with those... </font></div><div><font color="#000000">Thanks for any thoughts.</font></div><div><font color="#000000">Adam</font></div><div><br></div><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Adam Katzman<br>Autonomous Energies<br>PO Box 1245</div><div dir="ltr">Kingston, NY 12402<br><a href="http://www.autonomousenergies.com" target="_blank">www.autonomousenergies.com</a><br>(518) 567-1468<br><br></div></div></div></div></div></div></div></div>