<html><head><meta http-equiv="Content-Type" content="text/html; charset=utf-8"></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; line-break: after-white-space;" class="">HI Kirpal,<div class=""><br class=""></div><div class="">This sure seems like a real possibility. </div><div class=""><br class=""></div><div class="">I don\u2019t know that there have been any firmware updates. I know its one REV behind, but tech support didn\u2019t think that was an issue. </div><div class=""><br class=""></div><div class="">As to the installer menu, does anyone know where I can find a map/menu of all the options?</div><div class=""><br class=""></div><div class="">thx</div><div class=""><br class=""></div><div class="">jay<br class=""><div><br class=""><blockquote type="cite" class=""><div class="">On Jul 18, 2021, at 7:46 PM, Kirpal <<a href="mailto:solarworks@gmail.com" class="">solarworks@gmail.com</a>> wrote:</div><br class="Apple-interchange-newline"><div class=""><div dir="auto" class="">Hi Jay. We had a similar situation arise once after we updated the firmware of a 4048 radian. The inverter was a circa 2015 unit. After updating it would only sell about 1/4 of the normal array output to the grid. <div dir="auto" class="">We talked to Chris at tech support and he had us go into the installer menu and look up the max sell current and somehow the inverter firmware update had changed a setting deep in the installer menu to limit sell amps. It was a menu which we had never been in. Adjusting to the normal 16a of sell current up from the 4A immediately corrected the issue. </div><div dir="auto" class="">Your problem sounds exactly like the one we experienced. </div><div dir="auto" class="">Did you update firmware recently?</div><div dir="auto" class="">I believe you have to be on site to access the installer menu....</div><div dir="auto" class="">Chris is typically on the job at 6am pacific time and easy to get ahold of early....I recommend trying to get ahold of him to walk you thru the steps. </div><div dir="auto" class="">Best of luck.</div><div dir="auto" class="">Kirpal </div><div dir="auto" class="">Oregon Solarworks </div><div dir="auto" class=""><br class=""></div></div><br class=""><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Jul 18, 2021, 12:26 PM jay <<a href="mailto:jay.peltz@gmail.com" target="_blank" rel="noreferrer" class="">jay.peltz@gmail.com</a>> wrote:<br class=""></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">HI All,<br class="">
<br class="">
I\u201dm trying to diagnose the following system I didn\u2019t install.<br class="">
<br class="">
4 year old system grid tie battery back up.<br class="">
<br class="">
Radian 4048<br class="">
flexmax 80<br class="">
3500 watts PV<br class="">
fndc<br class="">
it is on opticsRE<br class="">
<br class="">
The symptoms are that its not selling much at all. Mostly when it is about 1kw max PV production and .8kw selling. I have disconnected the FNDC and after that it did seem to work better. <br class="">
<br class="">
Usually it will sell a bit, then buy a bit then sell and so on. Grid voltage is very constant at around 246vac. <br class="">
<br class="">
I\u2019ve been through the settings a few times with tech support, made adjustments and for a while it was selling pretty normally, but again today 0 production, CC is at float. <br class="">
<br class="">
I have not been to the site, I was just trying to do this all by optics. But I\u2019m going to have to go. I think there are 3 possible issues. <br class="">
<br class="">
1. the customer has always thought the production is low. And from what I\u2019ve seen that is true. This is in a very sunny place, no shade so with 3.5kw, 1kw is very low which I think they may have a few strings of the array are not connected. However why that bothers me is that the VOC/VMP voltages are too close in looking at the CC. Which leads me to think its been told to back off to the 1.0kw, by some setting, see #2. And its always around .8 selling and around 1kw output from the array. <br class="">
<br class="">
2. There is a programing issue. <br class="">
<br class="">
3. There is a hardware issue.<br class="">
<br class="">
<br class="">
If someone wants to look at the site, I have the info and they can log in. <br class="">
Or if they want to provide settings for me to triple check, that would be great<br class="">
and <br class="">
if they have any ideas as to why its acting like it is, very much appreciated <br class="">
So far even though tech support has viewed in on Optics and have had some recommendations as to settings, its not fixed the issue.<br class="">
<br class="">
thanks in advance,<br class="">
<br class="">
jay<br class="">
<br class="">
peltz power<br class="">
<br class="">
<br class="">
<br class="">
<br class="">
<br class="">
<br class="">
<br class="">
_______________________________________________<br class="">
List sponsored by Redwood Alliance<br class="">
<br class="">
Pay optional member dues here: <a href="http://re-wrenches.org/" rel="noreferrer noreferrer noreferrer" target="_blank" class="">http://re-wrenches.org</a><br class="">
<br class="">
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer noreferrer" target="_blank" class="">RE-wrenches@lists.re-wrenches.org</a><br class="">
<br class="">
Change listserver email address & settings:<br class="">
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank" class="">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br class="">
<br class="">
There are two list archives for searching. When one doesn't work, try the other:<br class="">
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer noreferrer" target="_blank" class="">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br class="">
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank" class="">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br class="">
<br class="">
List rules & etiquette:<br class="">
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer noreferrer" target="_blank" class="">http://www.re-wrenches.org/etiquette.htm</a><br class="">
<br class="">
Check out or update participant bios:<br class="">
<a href="http://www.members.re-wrenches.org/" rel="noreferrer noreferrer noreferrer" target="_blank" class="">http://www.members.re-wrenches.org</a><br class="">
<br class="">
</blockquote></div>
_______________________________________________<br class="">List sponsored by Redwood Alliance<br class=""><br class="">Pay optional member dues here: <a href="http://re-wrenches.org" class="">http://re-wrenches.org</a><br class=""><br class="">List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" class="">RE-wrenches@lists.re-wrenches.org</a><br class=""><br class="">Change listserver email address & settings:<br class=""><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" class="">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br class=""><br class="">There are two list archives for searching. When one doesn't work, try the other:<br class="">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/<br class="">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org<br class=""><br class="">List rules & etiquette:<br class="">http://www.re-wrenches.org/etiquette.htm<br class=""><br class="">Check out or update participant bios:<br class="">http://www.members.re-wrenches.org<br class=""><br class=""></div></blockquote></div><br class=""></div></body></html>