<div dir="auto">The "R" inverters have had a persistent issue that the list discussed recently. You get an error "inverter firmware mismatch". This results in losing a phase and then can be cleared by power cycling the Mate 3s and will work ok for a while and then repeat. The latest firmware for the Mate3s attempts to solve this but we will see...<div dir="auto"><br></div><div dir="auto">This has been an ongoing and frustrating issue with the fxr inverters. In my experience, this doesn't happen with fx inverters, or Radian inverters at all. Outback tech support had been all over the place on this but I think, with this latest firmwate release, acknowledge the issue. </div><div dir="auto"><br></div><div dir="auto">Good luck</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, May 17, 2021, 4:43 PM Jay <<a href="mailto:jay.peltz@gmail.com" target="_blank" rel="noreferrer">jay.peltz@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto"><div dir="ltr">Hi dave</div><div dir="ltr"><br></div><div dir="ltr">You\u2019ll need a new hub and mate 3S. </div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr">And check to make sure the main breakers are 250 amp. </div><div dir="ltr"><br></div><div dir="ltr">Jay</div><div dir="ltr">Peltz power. </div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br><blockquote type="cite">On May 17, 2021, at 8:21 AM, <a href="mailto:palumbo131m@gmail.com" rel="noreferrer noreferrer" target="_blank">palumbo131m@gmail.com</a> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr">\ufeff<div><p class="MsoNormal">I am considering swapping in new OutBack inverters into one of my neighborhoods 24V off grid systems. It now has two FX2524\u2019s. The demands on the system have grown, now a two family home with a 240Vac mini-split for air conditioning and a 240Vac Grundfos SQ 1/2hp sub pump to be added this summer to the system. Drilling a well for a back-up to the gravity fed spring water which has been getting too low during the past few summers. <u></u><u></u></p><p class="MsoNormal">I\u2019m assuming that I should go with two VFXR3524\u2019s.<u></u><u></u></p><p class="MsoNormal">Will this be a direct swap in as far as having the same wiring setup into an OutBack Flexware system? And will it work with an older Mate?<u></u><u></u></p><p class="MsoNormal">Anything else I should know about these OutBack \u201cR\u201d inverters?<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Dave Palumbo<u></u><u></u></p><p class="MsoNormal">Hyde Park, VT<u></u><u></u></p></div><span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://re-wrenches.org</a></span><br><span></span><br><span>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a></span><br><span></span><br><span>Change listserver email address & settings:</span><br><span><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a></span><br><span><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>List rules & etiquette:</span><br><span><a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a></span><br><span></span><br><span>Check out or update participant bios:</span><br><span><a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a></span><br><span></span><br></div></blockquote></div>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>