<p>Thanks! I thought this was for Offgrid and that was my mistake.</p>
<p>Will it run a 15A table saw without losing power, or was that just too much expertise? I will wait 3 years on anything that is suppose to replace what I already use. I have a low opinion of the all in one for Offgrid anyways. Especially a non low frequency design. Maybe time will change my opinion. Thanks for the info!</p>
<div>
<pre> </pre>
<pre><strong><span style="font-size: small;">Dave Angelini Offgrid Solar
"we go where powerlines don't"
<a href="http://members.sti.net/offgridsolar/" target="_blank">http://members.sti.net/offgridsolar/</a>
e-mail <a href="mailto:offgridsolar@sti.net">offgridsolar@sti.net</a>
text 209 813 0060</span></strong></pre>
</div>
<p>On Fri, 7 May 2021 17:48:59 -0700, Jeff Clearwater <jeffc@villagepowerdesign.com> wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px; width:100%"><!-- html ignored --><!-- head ignored --> <!-- meta ignored -->Dave A. - Sol-Arks'<span style="font-weight: bold;"> "GEN" breaker</span> can be used for 1 of 3 operations only - <span style="font-weight: bold;">Generator, AC Coupling OR Smart Load</span> (Load Shedding) So when you are grid-interactive (which takes up your GRID breaker) and you have PV and a Generator - the way to go is to have no AC Coupling - put the Grid and Gen where they belong and <span style="font-weight: bold;">enjoy the high efficiency and smart control of DC Coupling, Time of Use control (for the Genny,the Grid and the Batteries)</span> - all in the mid to high 90's efficiency that the Sol-Ark provides.<br /> <br /> I know <span style="font-weight: bold;">Dave T</span> that you already have an installed Enphase system that probably needs to be Rapid Shutdown compliant as well AND that you have a whole house genny - however - I still would take a strong look at the economic tradeoffs of rewiring the array to DC - (could install Tigo RS) - and splitting the whole house Gen output to the Sol-Ark and probably existing Transfer switch. We are just saying - now you are utilizing your equipment to the max! May not be economically feasible labor and additional hardware wise in this situation. But I surely would do the math and look at that tradeoff seriously - perhaps give that option to your customer to make the economic decision - would result in long term happy customer and most energy utilized with least fuel costs.<br /> <br /> I'll let that case rest! Gees! all you asked for was some relay advice! See what you get with this List!? too much expertise! :)<br /> <br /> Have fun,<br /> <br /> Jeff C.<br /> Village Power Design<br /> <br /> <br /> <span> </span><br />
<blockquote style="border: 0px none ! important;">
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:offgridsolar@sti.net">Dave Angelini Offgrid Solar</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 7, 2021 at 3:25 PM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<p>I do not know much about Sol-Arc, but one can AC couple and DC couple with a Radian or XW. The genset is on the genset input where it belongs.</p>
<p>For Offgrid AC coupling is just another way to damage a battery or genset that does not need to be there. I suppose in a really large microgrid with many houses and a skilled person on site, it could be used as a second best method to DC coupling everything.</p>
<div>
<div> </div>
<div><strong><span style="font-size: small;">Dave Angelini Offgrid Solar<br />"we go where powerlines don't"<br /><a href="http://members.sti.net/offgridsolar/">http://members.sti.net/offgridsolar/</a><br />e-mail <a href="mailto:offgridsolar@sti.net">offgridsolar@sti.net</a><br />text 209 813 0060</span></strong></div>
</div>
<p>On Fri, 7 May 2021 12:21:14 -0400, Jason Szumlanski <a class="moz-txt-link-rfc2396E" href="mailto:jason@floridasolardesigngroup.com"><jason@floridasolardesigngroup.com></a> wrote:</p>
<br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:jason@floridasolardesigngroup.com">Jason Szumlanski</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 7, 2021 at 9:21 AM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<div dir="auto">I like the idea of some small amount of AC Coupled PV for off-grid systems when there is a known consistent daytime load. Around here the worst case scenario involves afternoon air conditioning in summer, so some WSW-facing AC coupled PV is an efficient way to cover that load and go into darkness with full batteries.
<div dir="auto"> </div>
<div dir="auto">If I understand things correctly, with a Sol-Ark you can simultaneously do AC coupling on the GEN input and DC coupling on the MPPTs and use the GRID input for the generator. </div>
<div dir="auto"> </div>
<div dir="auto">Jason</div>
<div dir="auto"> </div>
</div>
<br /> <br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:dave@sungineersolar.com">Dave Tedeyan</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 7, 2021 at 8:41 AM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<div dir="ltr">I would certainly agree with you all that AC coupled for off-grid is not the best design choice. But just for clarification, this is a grid-tied system where there is already an Enphase M215 system and a whole house generator set up.
<div>Cheers, </div>
<div>Dave</div>
</div>
<br /><br clear="all" />
<div> </div>
-- <br />
<div class="gmail_signature" dir="ltr">
<div dir="ltr">
<div style="color: #888888;" dir="ltr"><strong>Dave Tedeyan, PE</strong></div>
<div style="color: #888888;" dir="ltr"><img src="cid:3583342fa0d7ebcb20f304d0de86a111@sti.net" alt="Sungineer Solar" width="200" height="50" /><strong><br /></strong>
<div>1653 Slaterville Road, Ithaca, NY 14850</div>
<div>Cell: 607-288-2898</div>
<div><a style="color: #1155cc;" href="http://www.sungineersolar.com/">www.sungineersolar.com</a></div>
</div>
</div>
</div>
<br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:jerrysgarage01@gmail.com">Jerry Shafer</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 7, 2021 at 8:10 AM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<div dir="auto">I have to agree with Dave on this, complex and off grid generally are not good together, l sugest backing up and you might consider a redesign, dump enphase, go directly in to the inverter DC side, now a gen set back up will work. Your spending more time and effort going in a bad direction. AC coupling for resi is not a great solution to start with and Solark even say that. KISS is better
<div dir="auto">Jerry</div>
<div dir="auto">NABCEP PV Inspector </div>
</div>
<br /> <br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:offgridsolar@sti.net">Dave Angelini Offgrid Solar</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 6, 2021 at 7:33 AM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<p>I would not do any of this for an offgrid client. It is against the rule of less is more. The whole design is flawed in my opinion.</p>
<div>
<div> </div>
<div><strong><span style="font-size: small;">Dave Angelini Offgrid Solar<br />"we go where powerlines don't"<br /><a href="http://members.sti.net/offgridsolar/">http://members.sti.net/offgridsolar/</a><br />e-mail <a href="mailto:offgridsolar@sti.net">offgridsolar@sti.net</a><br />text 209 813 0060</span></strong></div>
</div>
<p>On Tue, 4 May 2021 19:24:13 -0400, Dave Tedeyan <a class="moz-txt-link-rfc2396E" href="mailto:dave@sungineersolar.com"><dave@sungineersolar.com></a> wrote:</p>
<br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:dave@sungineersolar.com">Dave Tedeyan</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 4, 2021 at 4:24 PM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<div dir="auto">I suppose the question here is - which is the worse failure mode?
<div dir="auto">A. Solar turning off until an electrician can fix it.</div>
<div dir="auto">OR</div>
<div dir="auto">B. Not knowing the contactor failed until it does not open when the generator turns on and running the risk that the solar backfeeds the generator and breaks it.</div>
<div dir="auto"> </div>
<div dir="auto">For off-grid maybe A would be more of a concern. But for grid tied, I would think option B would be worse.</div>
<div dir="auto"> </div>
<div dir="auto">Does anyone have a fail safe method of doing this?</div>
<div dir="auto"> </div>
<div dir="auto">Cheers,</div>
<div dir="auto">Dave</div>
</div>
<br /> <br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:chris@solarandwindfx.com">Chris Schaefer</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 4, 2021 at 1:41 PM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<div dir="ltr">Jason,
<div> </div>
<div>A valid concern which is why I always wire them as powered open so if there is a failure it would transition closed or not open.</div>
<div> </div>
<div>Christopher</div>
</div>
<br /><br clear="all" />
<div> </div>
-- <br />
<div class="gmail_signature" dir="ltr">
<div dir="ltr">
<div>
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<p style="text-align: center;"><span style="font-size: 10pt; color: #1f497d;"><span style="font-family: Arial, sans-serif;">Chris Schaefer's<br /></span></span><a style="font-size: 12.8px;" href="http:www.solarandwindfx.com"><img style="color: #1f497d; font-family: Arial, sans-serif; font-size: 10pt;" src="cid:3583342fa0d7ebcb20f304d0de86a111@sti.net" alt="" width="200" height="40" /></a><br /><em><span style="font-family: Arial,sans-serif; color: #1f497d;"><span style="font-size: 9pt;">Tel/Fax 585-229-2083 or Cell 585-748-1870 </span><span style="font-size: 12px;"><br /></span></span></em><em style="font-size: 12.8px;"><span style="font-size: 10pt;"><span style="color: #1f497d;"><span style="font-family: Arial, sans-serif;">5115 South Hill Road ~ Canandaigua New York 14424<br /></span></span></span></em><em style="font-size: 12.8px;"><span style="font-size: 10pt; font-family: Arial,sans-serif; color: #1f497d;"><a href="http://www.solarandwindfx.com"><span style="color: blue;">www.solarandwindfx.com</span></a> ~ E-mail: <span style="color: blue;"><a href="mailto:chris@solarandwindfx.com">chris@solarandwindfx.com</a></span></span></em></p>
<p style="text-align: center;"><em><span style="font-size: 10pt; font-family: Arial,sans-serif; color: #1f497d;"><img src="cid:3583342fa0d7ebcb20f304d0de86a111@sti.net" alt="" width="200" height="56" /><br /></span></em></p>
<p style="text-align: center;"><span style="font-size: 10pt; font-family: Arial,sans-serif; color: black;">Thomas Jefferson, the author of our great Constitution, once said, "democracy" will cease to exist when you take away from those who are willing to work and give to those who would not."</span><span style="font-size: 10pt; font-family: Arial,sans-serif; color: #1f497d;"></span></p>
</div>
</div>
</div>
</div>
</div>
</div>
<br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:jason@floridasolardesigngroup.com">Jason Szumlanski</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 4, 2021 at 1:03 PM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<div dir="auto">
<div>What happens when the contactor fails? I don't trust a NC contactor that is supposed to open on 240Vac coil voltage from the generator. It's not a failsafe solution.
<div dir="auto"> </div>
<div dir="auto">Jason</div>
<div dir="auto"> </div>
<br /><br /></div>
</div>
<br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:drake.chamberlin@redwoodalliance.org">Drake</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 4, 2021 at 12:08 PM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored --> P.S. The contactor method is even mentioned somewhere in the Outback literature. I've been using it for years. It is very simple and requires no complex equipment. It will not interfere with rapid shutdown. 40 A, 240 V contactors with 240 V coils are readily available and not terribly expensive. The 240 V output of the generator circuit provides the signal. <br /><br /> At 10:02 AM 5/4/2021, you wrote:<br /> <br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:drake.chamberlin@redwoodalliance.org">drake.chamberlin@redwoodalliance.org</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 4, 2021 at 7:02 AM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<div id="signature">Get a contactor with a 240 VAC coil. Connect the coil wire wires to the 240 V output circuit of the generator, so when the generator comes on, the contactor opens. Run the current from the AC coupled Enphase inverters through the contacts from common to N/C.</div>
<div> </div>
<div>---<br />
<div class="pre" style="margin: 0; padding: 0; font-family: monospace;"> </div>
</div>
<p> </p>
<p id="reply-intro">On 2021-05-03 10:26, Dave Tedeyan wrote:</p>
<br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
<div class="__pbConvHr" style="margin: 30px 25px 10px 25px;">
<div style="width: 100%; border-top: 2px solid #EDF1F4; padding-top: 10px;">
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 49%;"><a style="color: #485664 !important; padding-right: 6px; font-weight: 500; text-decoration: none !important;" href="mailto:dave@sungineersolar.com">Dave Tedeyan</a></div>
<div style="display: inline-block; white-space: nowrap; vertical-align: middle; width: 48%; text-align: right;"><span style="color: #909aa4;"><span style="padding-left: 6px;">May 3, 2021 at 7:26 AM</span></span></div>
</div>
</div>
<div class="__pbConvBody" style="color: #909aa4; margin-left: 24px; margin-right: 24px;"><!-- meta ignored -->
<div dir="ltr">Hi All,
<div><br />
<div>I am planning on using a Sol-Ark for the first time for adding battery backup to an existing system. It is Enphase, so clearly it will be AC coupled, and there is a whole house generator. When I talked to Sol-Ark about it, they recommended putting the generator on a time of use schedule to not allow it to come on during the day so that we don't run into the issue of the solar backfeeding the generator.</div>
<div> </div>
<div>I was wondering though if anyone has just used a contactor to cut out the solar when the generator turns on? Something like Outback's GS-AC-Gen-Kit, although in this case I will need something rated for just over 30A. This seems like a better way to allow the generator to run at any time it is needed, especially if it is a gloomy, snowy, winter day.</div>
<div> </div>
<div>Cheers, </div>
<div>Dave<br />
<div> </div>
-- <br />
<div class="gmail_signature" dir="ltr">
<div dir="ltr">
<div style="color: #888888;" dir="ltr"><strong>Dave Tedeyan, PE</strong></div>
<div style="color: #888888;" dir="ltr"><img src="cid:3583342fa0d7ebcb20f304d0de86a111@sti.net" alt="Sungineer Solar" width="200" height="50" /><strong><br /></strong>
<div>1653 Slaterville Road, Ithaca, NY 14850</div>
<div>Cell: 607-288-2898</div>
<div><a style="color: #1155cc;" href="http://www.sungineersolar.com/">www.sungineersolar.com</a></div>
</div>
</div>
</div>
</div>
</div>
</div>
<br /><fieldset class="mimeAttachmentHeader"></fieldset><br />
<div>_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a><br /><br />List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
</blockquote>
</blockquote>