<div dir="ltr"><div>Chris&#39;s reminder is a good one\u2014the 600V rating of most insulated &quot;multi-tap&quot; connectors pretty much limits their use to residential systems. I would also keep in mind that those connectors generally have a torque spec. I&#39;ve definitely seen examples of meltdowns caused by poor terminations - either the compression screw isn&#39;t torqued properly or the conductor isn&#39;t fully inserted. To help eliminate the latter case, we used to favor the Burndy models (e.g., <a href="https://www.hubbell.com/burndy/en/Products/Power-Utilities/Connectors/Lugs-Terminals/Bolted/Vinyl-Insulated/BIT4/p/2021315">BIT4</a>) because they had a transparent case; I see that Polaris also now offers transparent models (e.g., <a href="http://www.nsiindustries.com/catalog/nsiproducts/polaris-mechanical-connectors/polaris-vision-tap/it-4c">IT-4C</a>).</div><div><br></div><div>--</div><div>Corey Shalanski</div><div>Jah Light Solar</div><div>Portland, Jamaica</div><div><br></div><div><br></div><div>On Wed, Apr 28, 2021 at 7:38 AM Chris Sparadeo &lt;<a href="mailto:sparadeo.chris@gmail.com" target="_blank">sparadeo.chris@gmail.com</a>&gt; wrote:</div><div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Keep in mind that Wagos, Polaris lugs, Multi-tap Burndy lugs are rated for 600V. I can see this being a possible use for MC4 connectors in a higher voltage splice scenario, because of their 1000V/1500V ratings.</blockquote></div></div>