<div dir="auto">Supper easy to do hanging on the wall, yes be carfull of the ribbon so use a nylon wire tie to protect the the ribbon when putting the cover back on. The wire tie goes perpendicular to the ribbon as you slide the cover back on. Easy!<div dir="auto">Jerry</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Feb 14, 2021, 8:46 PM Ray &lt;<a href="mailto:ray@solarray.com">ray@solarray.com</a>&gt; wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
  
    
  
  <div>
    <p>You&#39;ll pinch the ribbon cable, get really pissed and have to take
      it off the wall anyway.  I just deal with the tight AC
      connections, the DC main lugs that should not be torqued over 7
      ft-lbs, and take it off the wall.  Every time. I also now go ahead
      and do the control board, and the AC board if the clear covered
      relays are getting hard to see through from soot on the inside.  
      I just don&#39;t have time any more to run out 3 times in 6 months
      fixing an old Outback system. <br>
    </p>
    <p>Its really like replacing the timing belt on a car and not
      replacing the water pump at the same time.  A year from now,
      you&#39;ll wish you did.<br>
    </p>
    <pre cols="72">Ray Walters
Remote Solar
303 505-8760</pre>
    <div>On 2/14/21 11:08 PM, Howie Michaelson
      wrote:<br>
    </div>
    <blockquote type="cite">
      
      <div dir="auto">Ron,
        <div dir="auto">Easier than board replacement, but you need to
          open the body up the same way. The fan is attached to the
          upper part of the housing - 4 screws and a single connection.
          Trick will be finding the fan, although I think lots of
          distributors still have it in stock.</div>
        <div dir="auto">Howie<br>
          <br>
          <div data-smartmail="gmail_signature" dir="auto">Howie
            Michaelson<br>
            Sun Catcher<br>
            NABCEP Certified Solar PV Installer\u2122<br>
            Solar Electric &amp; Heat Pumps Systems Sales &amp; Service<br>
            802-272-0004</div>
        </div>
      </div>
      <br>
      <div class="gmail_quote">
        <div dir="ltr" class="gmail_attr">On Sun, Feb 14, 2021, 8:15 PM
          Ron Young &lt;<a href="mailto:solareagle@solareagle.com" target="_blank" rel="noreferrer">solareagle@solareagle.com</a>&gt;
          wrote:<br>
        </div>
        <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Wrenches,
          I have a client with an Outback GVFX3524 inverter that has had
          a fan failure. I will check with Outback but thought I might
          get a head start here. Is this a field replaceable item? I
          know the boards are but not sure about the fan. Any info much
          appreciated, thanks.<br>
          <br>
          Ron<br>
          <br>
          _______________________________________________<br>
          List sponsored by Redwood Alliance<br>
          <br>
          List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
          <br>
          Change listserver email address &amp; settings:<br>
          <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
          <br>
          There are two list archives for searching. When one doesn&#39;t
          work, try the other:<br>
          <a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
          <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
          <br>
          List rules &amp; etiquette:<br>
          <a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
          <br>
          Check out or update participant bios:<br>
          <a href="http://www.members.re-wrenches.org" rel="noreferrer
            noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
          <br>
        </blockquote>
      </div>
      <br>
      <fieldset></fieldset>
      <pre>_______________________________________________
List sponsored by Redwood Alliance

List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a>

Change listserver email address &amp; settings:
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>

There are two list archives for searching. When one doesn&#39;t work, try the other:
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" target="_blank" rel="noreferrer">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank" rel="noreferrer">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>

List rules &amp; etiquette:
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noreferrer">http://www.re-wrenches.org/etiquette.htm</a>

Check out or update participant bios:
<a href="http://www.members.re-wrenches.org" target="_blank" rel="noreferrer">http://www.members.re-wrenches.org</a>

</pre>
    </blockquote>
  </div>

_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address &amp; settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn&#39;t work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules &amp; etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>