<div dir="ltr">If you don't need a grid connection at other times, I have implemented a solution using a Raspberry Pi, reading the data using XML from the Mate3 and parsing the values, and opening and closing a relay which control a contactor. I used SOC as my guide, that's probably the most important value, but you can also use voltage.<div>If you know a little programming it is easy to implement. Let me know if you want any guidance.</div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Feb 4, 2021 at 1:58 PM Jerry Shafer <<a href="mailto:jerrysgarage01@gmail.com">jerrysgarage01@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">Wrenches, Kirpal <div dir="auto">I use the grid connection in the mate, grid use, and set the inverter to connect only at that time, its far from. Ideal but seems to do the job. I have tried the HBX but its inverse to what l wanted it to do, we are fortunate to have a Outback guy on this forum and he may chime in also</div><div dir="auto">Jerry</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Feb 4, 2021, 8:22 AM Kirpal <<a href="mailto:solarworks@gmail.com" target="_blank">solarworks@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Hi Folks....<div>We have a scenario where we would like to control when our system sells power back to the grid. Basically, we only want to sell back while the sun is shining. We would like to stop selling based on programmed clock settings. I know in HBX mode we can control when we buy from the grid, wondering if anyone knows how to control if and when we sell to the grid, separate from voltage set points. In this situation we basically don't want to sell hydro power back at night. </div><div>We can create our own relay controls to prevent if we need to, but hoping someone has a Mate controller based programming solution. I can't seem to find it and at first glance Outback tech support didn't have an answer...It was a new tech support guy I spoke with and he was going to do some research and get back to me. </div><div>100 Thanks!</div><div><br></div><div><div><div dir="ltr"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Sunny Regards,<br>Kirpal Khalsa</div><div dir="ltr">Oregon LRT#25<br>Oregon Solarworks LLC<br><a href="http://www.oregonsolarworks.com" rel="noreferrer" target="_blank">www.oregonsolarworks.com</a><br>541-299-0402</div></div></div></div></div></div></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div dir="ltr"><font color="#666666">Chris Mason</font></div><div dir="ltr"><div><span style="font-size:13px"><font color="#666666">Solar systems designer</font></span></div><div><span style="font-size:13px"><font color="#666666">Generac Generators Industrial technician</font></span></div><div><font color="#666666"><br></font></div><div><font color="#666666">Comet Systems Ltd DBA Comet Solar<br>Anguilla Cell 264.235.5670</font></div><div>WhatsApp <span style="color:rgb(102,102,102)">264.235.5670</span></div><div><font color="#666666">Skype: netconcepts</font></div><div><font color="#666666"><a href="http://www.cometenergysystems.com/" target="_blank">www.cometsolar.com</a></font></div></div></div></div>