<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>On both Outback and Midnites's AC/DC Load centers, they just have
separate areas, but there is no partition, or anything like that.
They are UL listed. I don't do GT, so I don't really deal with
this issue outside of the E panel, but if it were me, I'd just zip
tie the PV wires together, put labeling on them so that it was
clear they were PV conductors, and call it a day.<br>
</p>
<pre class="moz-signature" cols="72">Ray Walters
Remote Solar
303 505-8760</pre>
<div class="moz-cite-prefix">On 2/1/21 6:55 PM, Dave Angelini
Offgrid Solar wrote:<br>
</div>
<blockquote type="cite"
cite="mid:1d8a784814c2d76498b692ac494416ff@127.0.0.1">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<p>I land 600vdc PV into the Mppt/Mppt's only. I never mix 600vdc
with anything except SPD/disco ever!</p>
<p>Just not that hard and for offgrid, standard practice for
reliability. Same with 150vdc, I never get it into the PDP and
disco it up stream form mppt.</p>
<div>
<pre> </pre>
<pre><strong><span style="font-size: small;">Dave Angelini Offgrid Solar
"we go where powerlines don't"
<a href="http://members.sti.net/offgridsolar/" target="_blank" moz-do-not-send="true">http://members.sti.net/offgridsolar/</a>
e-mail <a href="mailto:offgridsolar@sti.net" moz-do-not-send="true">offgridsolar@sti.net</a>
text 209 813 0060</span></strong></pre>
</div>
<p>On Mon, 1 Feb 2021 15:37:34 -0700, Mac Lewis
<a class="moz-txt-link-rfc2396E" href="mailto:maclewis1@gmail.com"><maclewis1@gmail.com></a> wrote:</p>
<blockquote type="cite" style="padding-left:5px;
border-left:#1010ff 2px solid; margin-left:5px; width:100%"><!-- html ignored --><!-- head ignored --><!-- meta ignored -->
<div dir="ltr">Hello wrenches,
<div> </div>
<div>What are folks using for raceway partitions to comply
with 690.31(B) when running AC/DC and batteries conductors
through a common gutter? Is there a product or just
something made by the installer? These multiport inverters
make it difficult not to use a gutter and have a clean
installation. </div>
<div> </div>
<div>Thanks!<br clear="all">
<div> </div>
-- <br>
<div class="gmail_signature" dir="ltr">
<div> </div>
<div><span style="color: #305a78; font-family: 'times new
roman', serif;"> </span></div>
<div> </div>
Mac Lewis<br>
<br>
<p align="left"><span style="color: #000000; font-family:
Verdana, Arial, Helvetica, sans-serif;"><span
style="font-size: small;"><span style="font-family:
arial; font-weight: normal; color: #305a78;"><span
style="font-family: 'times new roman', serif;">"Yo
solo sé que no sé nada." </span><span
style="font-weight: bold; color: #686868;"><span
style="font-family: 'times new roman', serif;">-Sócrates</span></span></span></span></span></p>
</div>
</div>
</div>
</blockquote>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
List sponsored by Redwood Alliance
List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
There are two list archives for searching. When one doesn't work, try the other:
<a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a>
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
<a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a>
</pre>
</blockquote>
</body>
</html>