<div dir="ltr"><div>Wrenches</div><div>You may be able to connect the inverter directly to SMA either wifi or hard line and pipe in the web box data all through the portal</div><div>Jerry<br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Sep 4, 2020 at 10:39 AM Carl Adams <<a href="mailto:cadams@sunrocksolar.com">cadams@sunrocksolar.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div dir="ltr"><div class="gmail_quote"><div dir="ltr"><div class="gmail_quote"><div dir="ltr">Hello Wrenches,<div>I have an older system using an SMA SB 5000US-11 (picture attached)</div><div></div><div><img src="cid:ii_keoiu0142" alt="image.png" width="207" height="472"><br></div><div>The inverter has failed and I need to replace it. I was looking at using the SB 5.0-1SP-US-40. The system as installed has a WebBox and environmental sensors (pyronometer, anemometer, ambient and module temperature sensors.)</div><div>picture attached.</div><div><div></div><div><img src="cid:ii_keoiullb3" alt="image.png" width="472" height="345"><br></div><div>Is there an RS485 module which I can use with this replacement inverter which would allow the environmental sensors to continue working with the replacement inverter.</div></div><div>Perhaps this unit MD.485-US-40?</div><div><br></div><div><div><div dir="ltr"><div dir="ltr"><div><div>With Kind Regards<div>Carl Adams, President</div><div>SunRock Solar, LLC</div>513.290.9072 (mobile)</div><div>513.766.6025 (office)</div><br></div></div></div></div></div></div>
</div></div>
</div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>