<div dir="ltr"><div dir="ltr"><div class="gmail_quote"><div dir="ltr"><div class="gmail_quote"><div dir="ltr">Hello Wrenches,<div>I have an older system using an SMA SB 5000US-11 (picture attached)</div><div></div><div><img src="cid:ii_keoiu0142" alt="image.png" width="207" height="472"><br></div><div>The inverter has failed and I need to replace it.  I was looking at using the SB 5.0-1SP-US-40.  The system as installed has a WebBox and environmental sensors (pyronometer, anemometer, ambient and module temperature sensors.)</div><div>picture attached.</div><div><div></div><div><img src="cid:ii_keoiullb3" alt="image.png" width="472" height="345"><br></div><div>Is there an RS485 module which I can use with this replacement inverter which would allow the environmental sensors to continue working with the replacement inverter.</div></div><div>Perhaps this unit MD.485-US-40?</div><div><br></div><div><div><div dir="ltr"><div dir="ltr"><div><div>With Kind Regards<div>Carl Adams, President</div><div>SunRock Solar, LLC</div>513.290.9072 (mobile)</div><div>513.766.6025 (office)</div><br></div></div></div></div></div></div>
</div></div>
</div></div></div>