<p>Hi Ray,</p>
<p>I guess it is not my last :) I attached AES battery. Fortress is similar. AES quickstart on Schneider is program the time and date for config. You do not need a computer as the SCP can be used. Both are closed loop BMS to inverter/charger/mppt on xw and csw. I am hoping Outback will do something like this.</p>
<p>I have helped quite a few wrenches with getting the Insight monitoring going remotely. It is not any more difficult than optics which I run also. It is not easy, and the quickstart must be followed exactly. Attached a screen from 5 minutes back. It has been extremely reliable also.</p>
<p>Below is the case. My guess as to why this takes so long is that it is a UL cert issue for Schneider. Cost quite a bit of money for the testing or to change the range of LBCO. My guess only.</p>
<p> </p>
<div>
<table border="0" cellspacing="0" cellpadding="0">
<tbody>
<tr><th align="right" valign="baseline" nowrap="nowrap">Date:</th>
<td>Mon, 10 Aug 2020 11:29:05 -0700 (PDT)</td>
</tr>
<tr><th align="right" valign="baseline" nowrap="nowrap">From:</th>
<td>"Solar Support EMEA (solar.support.emea@schneider-electric.com)" <system@sent-via.netsuite.com></td>
</tr>
<tr><th align="right" valign="baseline" nowrap="nowrap"> </th>
<td> </td>
</tr>
</tbody>
</table>
<p>A new case was just created using On Line – CIB Tech Support Schneider Electric Industries SAS.</p>
<p>Case Message:865xxxx LBCO max is 48 vdc, needs to be higher for some batteries like simplyphi. </p>
</div>
<div><br />
<pre> </pre>
<pre><strong><span style="font-size: small;">Dave Angelini Offgrid Solar
"we go where powerlines don't"
<a href="http://members.sti.net/offgridsolar/" target="_blank">http://members.sti.net/offgridsolar/</a>
e-mail <a href="mailto:offgridsolar@sti.net">offgridsolar@sti.net</a>
text 209 813 0060</span></strong></pre>
</div>
<p>On Mon, 10 Aug 2020 14:47:49 -0600, Ray <ray@solarray.com> wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px; width:100%"><!-- html ignored --> <!-- head ignored --> <!-- meta ignored -->
<p>Appreciate forwarding this to Schneider. So you never had any issues programming their monitoring system or getting it connected to the internet via the customer's router? </p>
<p>What is the LBCO recommended for the Li+ batteries you are using? Default on many inverters for FLA is 42 or 44 volts, so I didn't realize any Li+ batteries could work correctly that low. </p>
<pre class="moz-signature">Ray Walters
Remote Solar
303 505-8760</pre>
<div class="moz-cite-prefix">On 8/10/20 2:24 PM, Dave Angelini Offgrid Solar wrote:</div>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px; width:100%"><!-- meta ignored -->
<p> </p>
</blockquote>
</blockquote>