<div id="__MailbirdStyleContent" style="font-size: 12pt;font-family: Arial;color: #000000">I need to spec battery cable for a nominal 850 vdc LFP bank. Several brands of power cable list their rating at a dual 600/1000v. it is my understanding that to be listed in this manner, the cable must pass a test apply of over 600v for a short period&nbsp; without breakdown. But under normal operation IMO, the voltage is not to exceed 600v. And this test is done with AC voltage, not DC.<div><span style="font-size: 12pt;color: rgb(51, 51, 51);font-family: oswald, sans-serif"><br></span></div><div><span style="font-size: 12pt;color: rgb(51, 51, 51);font-family: oswald, sans-serif">"<b>UL 1277: Power and Control Tray Cable</b></span><br></div><div><p style="box-sizing: border-box; margin-bottom: 8px; margin-top: 0px; padding-top: 0px; padding-bottom: 0px; color: rgb(51, 51, 51); font-family: lato, sans-serif; line-height: 22px; text-size-adjust: none;">UL 1277, the standard for electrical power and control tray cable, was recently updated, allowing manufacturers with UL approved tray cable to market their product as 600V/1kV rated. To be dual rated, products must use a recognized 1kV rated conductor and pass a higher voltage AC Hipot test on the completed cable. This test requires each insulated conductor in finished cable to withstand a specified voltage range for one minute without breakdown. If a product passes the AC Hipot test, it is suitable for 1kV use."</p><div class="mb_sig"></div><div><br></div><div>Am I getting this right? And If so, one should not use this 600/1000v wire if normal operating voltage is above 600v as is my case? Proper rating should be dual 1000/2000v like PV wire?</div><div><br></div><div>What do you experienced high voltage battery gurus use in my application? Thanks.</div></div></div>