<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div dir="ltr">Rick:</div><div dir="ltr">1) consider renting or buying an engine hoist to pull out the individual cells, and lowering each onto a hand truck for transport to your truck. I have done this several times - it\u2019s actually not that difficult with a crew of two or three. </div><div dir="ltr">Northwest Energy Storage (www.solarone com, I think) supplies a short, heavy nylon strap with clevises at each end for raising and lowering each cell. You might contact them to purchase one. </div><div dir="ltr">At one remote site, the client suggested that I buy a cheap engine hoist from Harbor Freight, as it would be cheaper than renting a professional one. </div><div dir="ltr"><br></div><div dir="ltr">2) the older Trace SW series is early technology in regards to its sell efficiency, because of the lack of what was dubbed \u2018silent sell\u2019. The general number from when it was about the only game in town was about 55%. I would suggest upgrading to a modern unit if it\u2019s primarily used for selling back. </div><div dir="ltr"><br></div><div dir="ltr">Allan Sindelar, Sindelar Solar</div><div dir="ltr"><br><blockquote type="cite">On Jul 23, 2020, at 3:47 PM, Rick Brown <rick@solshineenergyalternatives.com> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr">\ufeff<meta http-equiv="content-type" content="text/html; charset=utf-8">Wrenches,<div><br></div><div>Dilemma #1:</div><div><br></div><div>I\u2019ve had to replace 4 sets of Solar One batteries (see pic). Each set weighs in excess of 1000lbs. How have you all transported these? The originals were placed into service prior to the room\u2019s walls and roof going up. </div><div><br></div><div><div><image0.jpeg></div><br></div><div><br></div><div>Dilemma #2:</div><div><br></div><div>The above system is comprised of a Trace SW5548 along with two Outback FM60s. After reprogramming the CCs and inverter with new charging parameters, I can\u2019t get the Trace to export excess production once the batteries are charged. I do have the inverter set to \u201cSell\u201d mode What am I missing? I have had little experience with the Trace line. </div><div><br></div><div>Thanks,<br><br><div dir="ltr"><span style="background-color: rgba(255, 255, 255, 0);">rick brown<br>SolShine Energy Alternatives, LLC<br>Electrical & Solar Contracting Services<br><a dir="ltr" href="http://www.SolShineEnergyAlternatives.com">www.SolShineEnergyAlternatives.com</a><br>Check, Virginia 24072<br><a dir="ltr" href="tel:540.808.9502" x-apple-data-detectors="true" x-apple-data-detectors-type="telephone" x-apple-data-detectors-result="3/3">540.808.9502</a><br><br>VA Class A Contractor Lic# 2705147660<br>VA Master Electrician Lic# 2710062762<br>VA Alternative Energy Systems Installer <br>NABCEP Certified PV Installation Professional 110112-21</span></div></div><span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>List Address: RE-wrenches@lists.re-wrenches.org</span><br><span></span><br><span>Change listserver email address & settings:</span><br><span>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</span><br><span></span><br><span>List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</span><br><span></span><br><span>List rules & etiquette:</span><br><span>www.re-wrenches.org/etiquette.htm</span><br><span></span><br><span>Check out or update participant bios:</span><br><span>www.members.re-wrenches.org</span><br><span></span><br></div></blockquote></body></html>