<div dir="ltr">Since the Flexnet on port 3 was active and could be seen on the Mate, thus I moved the slave on port 2 to port 3 and moved the FlexNet from port 3 to port 4. No change. I did try another OB factory green cable to no avail.<div><br></div><div>Christopher</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Jun 25, 2020 at 4:25 PM Jerry Shafer <<a href="mailto:jerrysgarage01@gmail.com">jerrysgarage01@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">Chris<div dir="auto">Did you skip over and plug in to port 3 with the slave, swap the cord, </div><div dir="auto">Jerry</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Jun 25, 2020, 12:54 PM Chris Schaefer <<a href="mailto:chris@solarandwindfx.com" target="_blank">chris@solarandwindfx.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">The system is critical to a farm watering operation so I wasn't able to shut it down to try and swap the port 1 inverter with the port 2 inverter. As for changing the power save settings, that is what alerted me to the issue. Under no circumstance can you see a port 2 via the Mate. That's what had me looking at the hub itself and that's when I noticed that the LED on port 2 wasn't lighting up as the hub scrolled/polled by.<div><br></div><div>Christopher</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Jun 25, 2020 at 3:37 PM William Miller <<a href="mailto:william@millersolar.com" rel="noreferrer" target="_blank">william@millersolar.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div lang="EN-US"><div><p class="MsoNormal"><span style="font-family:Verdana,sans-serif;color:rgb(31,73,125)">Christopher;</span></p><p class="MsoNormal"><span style="font-family:Verdana,sans-serif;color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,sans-serif;color:rgb(31,73,125)">Just spit-balling here: is the secondary inverter asleep (hate the master/slave terminology\u2026)? Try changing power save settings to make sure the secondary is awake and see if that changes the situation. Seems unlikely this will solve the problem, but it may provide some kind of clue.</span></p><p class="MsoNormal"><span style="font-family:Verdana,sans-serif;color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,sans-serif;color:rgb(31,73,125)">Also, did you try swapping primary and secondary? Run with secondary alone as primary?</span></p><p class="MsoNormal"><span style="font-family:Verdana,sans-serif;color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,sans-serif;color:rgb(31,73,125)">William Miller</span></p><p class="MsoNormal"><span style="font-family:Verdana,sans-serif;color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><b><span style="font-size:10pt;font-family:Tahoma,sans-serif">From:</span></b><span style="font-size:10pt;font-family:Tahoma,sans-serif"> RE-wrenches [mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" rel="noreferrer" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>] <b>On Behalf Of </b>Chris Schaefer<br><b>Sent:</b> Thursday, June 25, 2020 10:35 AM<br><b>To:</b> RE-wrenches<br><b>Subject:</b> [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s</span></p><p class="MsoNormal"> </p><div><p class="MsoNormal">G'Day All,</p><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">So I started up a system recently with two Radian 8048A's. The master is connected to port 1 and the slave connected to port 2 with the FlexNet at port 3. There are no OB charge controllers in the system. When the hub is polling (led's scrolling) nothing shows up for the slave at port 2. It's like the slave inverter doesn't exist. So I moved the slave and flexnet down to port 3 and 4. No change in the polling. I swapped out comm (factory green) cables. Again no change. Looking at the control board of the slave there is only one green led on which is located at the upper right-hand side. Otherwise no led's are on. I have 57v at the buss bar terminals of the inverter. Of course since there is no polling at the hub there is no way to view port 2 to view the slave at the Mate.</p></div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">Now the only thing that I didn't do was to try and use the manual on/off switch-jumper to start the slave. But in the past regardless of the inverter being on or off it would still show up on the hub. This is a new one and I'm looking for some direction here.</p></div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">Thanks,</p></div><div><p class="MsoNormal">Christopher- </p></div><div><div><div><div><div><div><p align="center" style="text-align:center"><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(31,73,125)">Chris Schaefer\u2019s<br></span><a href="http://www.solarandwindfx.com" rel="noreferrer" target="_blank"><span style="font-size:9.5pt;text-decoration:none"><img border="0" width="200" height="40" id="gmail-m_2221295137900357429m_612008771114666057gmail-m_4401531923909499766_x0000_i1025" src="http://www.solarandwindfx.com/wp-content/uploads/2015/01/Solar-Wind-FX-Logo.png"></span></a><br><i><span style="font-size:9pt;font-family:Arial,sans-serif;color:rgb(31,73,125)">Tel/Fax 585-229-2083 or Cell 585-748-1870 <br></span></i><i><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(31,73,125)">5115 South Hill Road ~ Canandaigua New York 14424<br><a href="http://www.solarandwindfx.com" rel="noreferrer" target="_blank">www.solarandwindfx.com</a> ~ E-mail: </span></i><i><span style="font-size:10pt;font-family:Arial,sans-serif;color:blue"><a href="mailto:chris@solarandwindfx.com" rel="noreferrer" target="_blank">chris@solarandwindfx.com</a></span></i></p><p align="center" style="text-align:center"><i><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(31,73,125)"><img border="0" width="200" height="56" id="gmail-m_2221295137900357429m_612008771114666057gmail-m_4401531923909499766_x0000_i1026" src="http://solarandwindfx.com/wp-content/uploads/2015/01/certs.jpg"></span></i></p><p align="center" style="text-align:center"><span style="font-size:10pt;font-family:Arial,sans-serif;color:black">Thomas Jefferson, the author of our great Constitution, once said, "democracy" will cease to exist when you take away from those who are willing to work and give to those who would not."</span></p></div></div></div></div></div></div></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr"><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><p style="text-align:center"><span style="font-size:10pt;color:rgb(31,73,125)"><font face="Arial, sans-serif">Chris Schaefer\u2019s<br></font></span><a href="http:www.solarandwindfx.com" style="font-size:12.8px" rel="noreferrer" target="_blank"><img src="http://www.solarandwindfx.com/wp-content/uploads/2015/01/Solar-Wind-FX-Logo.png" width="200" height="40" style="color: rgb(31, 73, 125); font-family: Arial, sans-serif; font-size: 10pt;"></a><br><i><span style="font-family:Arial,sans-serif;color:rgb(31,73,125)"><span style="font-size:9pt">Tel/Fax
585-229-2083 or Cell 585-748-1870 </span><span style="font-size:12px"><br></span></span></i><i style="font-size:12.8px"><span style="font-size:10pt"><font color="#1f497d"><font face="Arial, sans-serif">5115
South Hill Road ~ Canandaigua New York 14424<br></font></font></span></i><i style="font-size:12.8px"><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(31,73,125)"><a href="http://www.solarandwindfx.com" rel="noreferrer" target="_blank"><span style="color:blue">www.solarandwindfx.com</span></a> ~ E-mail: <span style="color:blue"><a href="mailto:chris@solarandwindfx.com" rel="noreferrer" target="_blank">chris@solarandwindfx.com</a></span></span></i></p><p style="text-align:center"><i><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(31,73,125)"><img src="http://solarandwindfx.com/wp-content/uploads/2015/01/certs.jpg" width="200" height="56"><br></span></i></p>
<p style="text-align:center"><span style="font-size:10pt;font-family:Arial,sans-serif;color:black">Thomas Jefferson,
the author of our great Constitution, once said, "democracy" will
cease to exist when you take away from those who are willing to work and give
to those who would not."</span><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(31,73,125)"></span></p></div></div></div></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><p style="text-align:center"><span style="font-size:10pt;color:rgb(31,73,125)"><font face="Arial, sans-serif">Chris Schaefer\u2019s<br></font></span><a href="http:www.solarandwindfx.com" style="font-size:12.8px" target="_blank"><img src="http://www.solarandwindfx.com/wp-content/uploads/2015/01/Solar-Wind-FX-Logo.png" width="200" height="40" style="color: rgb(31, 73, 125); font-family: Arial, sans-serif; font-size: 10pt;"></a><br><i><span style="font-family:Arial,sans-serif;color:rgb(31,73,125)"><span style="font-size:9pt">Tel/Fax
585-229-2083 or Cell 585-748-1870 </span><span style="font-size:12px"><br></span></span></i><i style="font-size:12.8px"><span style="font-size:10pt"><font color="#1f497d"><font face="Arial, sans-serif">5115
South Hill Road ~ Canandaigua New York 14424<br></font></font></span></i><i style="font-size:12.8px"><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(31,73,125)"><a href="http://www.solarandwindfx.com" target="_blank"><span style="color:blue">www.solarandwindfx.com</span></a> ~ E-mail: <span style="color:blue"><a href="mailto:chris@solarandwindfx.com" target="_blank">chris@solarandwindfx.com</a></span></span></i></p><p style="text-align:center"><i><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(31,73,125)"><img src="http://solarandwindfx.com/wp-content/uploads/2015/01/certs.jpg" width="200" height="56"><br></span></i></p>
<p style="text-align:center"><span style="font-size:10pt;font-family:Arial,sans-serif;color:black">Thomas Jefferson,
the author of our great Constitution, once said, "democracy" will
cease to exist when you take away from those who are willing to work and give
to those who would not."</span><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(31,73,125)"></span></p></div></div></div></div></div></div>