<p><img title="Wink" src="cid:smiley-wink.gif@sti.net" alt="Wink" border="0" /></p>
<pre>You think it is interesting? I hate problems like this.<br /><br />You are doing the right thing in my opinion. Disconnect the network and try to duplicate. This is a troubleshoot halfsplit to an engineer/technician, or you and me....<br /><br />The other choice at this point would be a complete DC disconnect for as long as it takes to get the DC system wide to below 2vdc.<br /><br />Your question on programming? Did someone/something put the CC into float only mode? I had a customer who did weird things and I set-up logging on an SD card and it recorded system changes. He paid me a bit of money for me to prove he was the problem. <br /><br />Nice and cool! Gonna play "highway to hell" and wack the weeds.<br /><br />
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridsolar@sti.net
text 209 813 0060
On Sat, 6 Jun 2020 18:35:30 -0700, Jay <jay.peltz@gmail.com> wrote:
> I’ve got a interesting problem I’ve not seen before.
>
> Mate 3
> Hub
> Radian
> Fm-80
>
> It’s been installed for 5 + years.
>
> Recently the caretaker noticed every other day it wasn’t charging. This is
> confirmed on the CC and logging.
> It was in float all day.
>
> We disconnected it from the hub and it’s charging normally.
>
> I’m not aware of any mate 3 settings that would make this happen.
>
> Comments?
>
> Thx
>
> Jay
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org</pre>