<div dir="ltr">Hmm: this is vague from the Radian Manual but it kind of seems like no imbalance is tolerated (4 kVa/phase)<div><div><img src="cid:ii_kan3ywq70" alt="image.png" width="472" height="127"><br></div></div><div>Schneider is more clear:</div><div>Looks like:</div><div>46A L to N with the 5548</div><div>48A L to N with the 6848</div><div><br></div><div><div><img src="cid:ii_kan42o4z1" alt="image.png" width="472" height="364"><br></div></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, May 25, 2020 at 4:19 PM Mark Frye <<a href="mailto:markf@berkeleysolar.com">markf@berkeleysolar.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">OK, so with a Radian or XW what is the per-phase % of total rated power? <br>
50%?<br>
<br>
On 5/25/2020 2:16 PM, Dave Angelini Offgrid Solar wrote:<br>
> From what I have seen most folks get into trouble with split phase because<br>
> they are using too small of an inverter. For a home or larger I only use<br>
> the big radians or an XW's.<br>
><br>
> Some do have problems because they are refitting an old 120vac power<br>
> system to split phase and the load panel was never balanced at all.<br>
><br>
> Dave Angelini Offgrid Solar<br>
> "we go where powerlines don't"<br>
> <a href="http://members.sti.net/offgridsolar/" rel="noreferrer" target="_blank">http://members.sti.net/offgridsolar/</a><br>
> e-mail <a href="mailto:offgridsolar@sti.net" target="_blank">offgridsolar@sti.net</a><br>
> text 209 813 0060<br>
><br>
> On Mon, 25 May 2020 14:08:03 -0700, Mark Frye <<a href="mailto:markf@berkeleysolar.com" target="_blank">markf@berkeleysolar.com</a>><br>
> wrote:<br>
>> Folks,<br>
>><br>
>> Back again into the way back machine, I once installed a system with<br>
>> multiply FX's stacked in a split-phase configuration. At the advice of<br>
>> the engineer, I also installed an auto-transformer across the lines to<br>
>> help balance the per-phase loads.<br>
>><br>
>> With the current split-phase inverters (Outback, Schneider, Magnum) what<br>
>> is the per-phase rating? Do any or all of them deliver 100% output<br>
>> rating to a single phase? If not, what is the max percentage output is<br>
>> allowed on a single phase? Do folks have to spend alot of time making<br>
>> sure there split-phase loads are balanced?<br>
>><br>
>> Thanks,<br>
>><br>
>> Mark<br>
>><br>
>> _______________________________________________<br>
>> List sponsored by Redwood Alliance<br>
>><br>
>> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
>><br>
>> Change listserver email address & settings:<br>
>> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
>><br>
>> List-Archive:<br>
>><br>
> <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
>> List rules & etiquette:<br>
>> <a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
>><br>
>> Check out or update participant bios:<br>
>> <a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
> _______________________________________________<br>
> List sponsored by Redwood Alliance<br>
><br>
> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
><br>
> Change listserver email address & settings:<br>
> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
><br>
> List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
><br>
> List rules & etiquette:<br>
> <a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
><br>
> Check out or update participant bios:<br>
> <a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
><br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature"><div><br></div><div><font color="#305A78" face="'times new roman', serif"><br></font></div><div><br></div>Mac Lewis<br><br><span style="font-family:"Times New Roman";font-size:medium;color:rgb(255,153,0)"><b><font face="Arial, Helvetica, sans-serif" size="3"><p align="left"><font color="#000000" face="Verdana, Arial, Helvetica, sans-serif"><span style="font-size:small"><span style="font-family:arial;font-weight:normal;color:rgb(48,90,120)"><font face="'times new roman', serif">"Yo solo sé que no sé nada." </font><span style="font-weight:700;color:rgb(104,104,104)"><font face="'times new roman', serif">-Sócrates</font></span></span></span></font></p></font></b></span></div>