<html><head><meta http-equiv="Content-Type" content="text/html; charset=utf-8"></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; line-break: after-white-space;" class="">HI Howie, <div class="">That would have been the PS inverter, not the SW that had the RC8 remote control.</div><div class=""><br class=""></div><div class="">But I agree with you on the reliability of the TM500. I\u2019ve taken out many that have failed or worse have been random in % readings. I\u2019ve replaced them with Trimetrics. So I don\u2019t recommend the TM500.</div><div class=""><br class=""></div><div class="">As to Allans question about the TM500 working to turn on/off the inverter, I\u201dm leaning not but its possible that its just a dry contact in the workings of that unit. </div><div class="">It will be in an interesting test. </div><div class=""><br class=""></div><div class=""><br class=""></div><div class="">jay</div><div class=""><br class=""></div><div class="">peltz power</div><div class=""><br class=""></div><div class=""><br class=""></div><div class=""><br class=""></div><div class=""><br class=""></div><div class=""><div class=""><div><blockquote type="cite" class=""><div class="">On May 10, 2020, at 5:43 PM, Howie Michaelson <<a href="mailto:Howie.Michaelson@gmail.com" class="">Howie.Michaelson@gmail.com</a>> wrote:</div><br class="Apple-interchange-newline"><div class=""><div dir="ltr" class=""><div class="">Hey Allan,</div><div class="">I don't know about the wiring of the on/off switch - I'm not sure it is simple logic. I do believe it worked for the trace SW, not sure about the DR.</div><div class="">I wouldn't recommend using the TM500 - I ran into a significant problem with it when used with an SW and a C40 back some 17 years ago, which eventually led me to stop using Xantrex equipment due to the either ignorance or withholding of info by their tech support about this issue. I remember talking to Ralph who said he had strongly recommended to Xantrex to not split his logic board the way they did, putting part of it onto the shunt, because he thought it might cause communication issues, which in my case it did. Long story which I believe I posted here many years ago, but it was a major pain. I have used TM500s many times successfully, although they seemed vulnerable to surge damage. I don't think I've heard any equipment conflicts with it and non-Xantrex equipment, I just have a visceral reaction to using them. Sorry for the diversion...<br class=""></div><div class="">Howie<br class=""></div></div><br class=""><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, May 10, 2020 at 8:25 PM Sindelar Solar <<a href="mailto:Allan@sindelarsolar.com" class="">Allan@sindelarsolar.com</a>> wrote:<br class=""></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF" class=""><p class="">Esteemed Wrenches, graybeard (used here as a gender-neutral term)
contingent:</p><p class=""> I am putting together a low-cost off grid upgrade package for my
nearest neighbor out here, who has lived with a most basic system
with little upgrade since the 80s. She needs a sinewave inverter
to run a modern washing machine. I'm using good older equipment
left over from other upgrades: an early narrow FX E-Panel, Outback
VFX3524, ProStar 30, circuit breakers (!), etc. <br class="">
</p><p class="">I have a 'Trace Meter Battery Monitoring System' that I'd like to
include for her. It's basically a TriMetric variant that Trace
purchased the rights to modify and private label from Ralph at
Bogart Engineering about 15-20 years ago. I can easily find the
installation and operations manual online. But unlike the
TriMetric, Trace removed the terminal screw strip on the monitor
PCB, replacing it with two RJ6 connectors and a plug-in phone
cable. A matching connector was included with the meter that
mounted to the kelvin terminals on the 500A/50mv shunt.<br class="">
</p><p class="">I have a (believed to be) working monitor and a bunch of 6-pole
RJ6 cables (they were also used to parallel DRs for 120/240, and
maybe other tasks as well) but not the matching shunt board. Does
anyone know, or can tell me how to determine, which RJ6 terminals
are which? The TM2020 on which this meter was based had 4: G1, G2,
SIG and +. Also, the monitor also has a second RJ6 terminal for
serving as an on/off switch for (probably) the DR. Do you know
which terminals are used for this remote switch function, and
whether it could also serve as an on/off switch on the inverter by
connecting to the remote switch terminals on the VFX (this works
with a standard on/off switch in place of the Mate, so it oughtta
also work with this switch function, no?).</p><p class="">Thank you for any assistance you may provide.</p><p class="">Allan<br class="">
</p>
<div class="">-- <br class="">
<div class=""><p class="MsoNormal" style="line-height:normal"><b class=""><span class="">Allan
Sindelar</span></b><span class=""><br class="">
</span><a href="mailto:allan@sindelarsolar.com" target="_blank" class=""><span class="">allan@sindelarsolar.com</span></a><span class=""><br class="">
</span><span class="">NABCEP
Certified PV Installation
Professional<br class="">
New Mexico EE98J Journeyman Electrician<br class="">
Founder (Retired), <span class="">Positive
Energy, Inc<span class="">.</span></span><br class="">
<b class="">505 780-2738 cell</b></span><span class=""><u class=""></u><u class=""></u></span></p><p class="MsoNormal"><u class=""></u> <u class=""></u></p>
</div>
</div>
</div>
_______________________________________________<br class="">
List sponsored by Redwood Alliance<br class="">
<br class="">
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" class="">RE-wrenches@lists.re-wrenches.org</a><br class="">
<br class="">
Change listserver email address & settings:<br class="">
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank" class="">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br class="">
<br class="">
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank" class="">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br class="">
<br class="">
List rules & etiquette:<br class="">
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank" class="">www.re-wrenches.org/etiquette.htm</a><br class="">
<br class="">
Check out or update participant bios:<br class="">
<a href="http://www.members.re-wrenches.org/" rel="noreferrer" target="_blank" class="">www.members.re-wrenches.org</a><br class="">
<br class="">
</blockquote></div>
_______________________________________________<br class="">List sponsored by Redwood Alliance<br class=""><br class="">List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" class="">RE-wrenches@lists.re-wrenches.org</a><br class=""><br class="">Change listserver email address & settings:<br class=""><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" class="">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br class=""><br class="">List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html<br class=""><br class="">List rules & etiquette:<br class="">www.re-wrenches.org/etiquette.htm<br class=""><br class="">Check out or update participant bios:<br class="">www.members.re-wrenches.org<br class=""><br class=""></div></blockquote></div><br class=""></div></div></body></html>