<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /></head><body style='font-size: 10pt; font-family: Verdana,Geneva,sans-serif'>
<p>I live in a small town, so our outreach probably has greater impact. We have gone to the FD meetings, we tell them about the system types and definitions, quiz them and follow up. So, I think depending upon training, which is not a one shot deal, it can have an impact. They seem relieved.</p>
<div> </div>
<p><br /></p>
<p>On 2020-05-07 11:39, Brian Mehalic wrote:</p>
<blockquote type="cite" style="padding: 0 0.4em; border-left: #1010ff 2px solid; margin: 0"><!-- html ignored --><!-- head ignored --><!-- meta ignored -->
<div dir="ltr">I agree: utilize the formal process, ideally with a group of folks. If you are a SEIA member, get involved in their Codes and Standards process. The additional directory language you suggest is not likely to be valuable to many first responders without significant training and documentation, and even then is still likely to get "lost" amongst other labels and directories. RS as required now instead focuses on an initiation device(s), so that the device is all responders need to look for - it's up to the installer to specify and put in the correct gear to make RS happen, and the AHJ to verify this.<br clear="all" />
<div>
<div class="gmail_signature" dir="ltr">
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div> </div>
<div>Brian Mehalic <br />NABCEP Certified Solar PV Installation Professional™ R031508-59</div>
<div>National Electrical Code® CMP-4 Member</div>
<div>(520) 204-6639<br />
<div> </div>
<div>
<div>
<div>Solar Energy International<br /><a href="http://www.solarenergy.org" target="_blank" rel="noopener noreferrer">http://www.solarenergy.org</a></div>
</div>
</div>
</div>
<div> </div>
<div>SEI Professional Services</div>
<div><a href="http://www.seisolarpros.com" target="_blank" rel="noopener noreferrer"><span style="font-size: 12.8px;">http://www.s</span>eisolarpros.com</a></div>
<div> </div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<br />
<div class="gmail_quote">
<div class="gmail_attr" dir="ltr">On Thu, May 7, 2020 at 6:43 AM Christopher Warfel <<a href="mailto:cwarfel@entech-engineering.com">cwarfel@entech-engineering.com</a>> wrote:</div>
<blockquote class="gmail_quote" style="margin: 0px 0px 0px 0.8ex; border-left: 1px solid #cccccc; padding-left: 1ex;">
<div>
<p>I believe Rapid Shutdown was mostly a solution looking for a problem. The only way I see this becoming "reasonable" is to present "grievances" to the Code Making Panel WITH a solution for their consideration. Based on experience from being part of an outreach program that taught approximately 10k firefighters over four years, I have asked that they add to the Directory, the language that states what type of solar electric system is on site (Microinverter, dc optimizer, string, multimode, grid isolated) so that First Responders don't have to guess. I realize this is different than MLPE, but it targets the person who Rapid Shutdown came into being for, and that was the First Responder. Chris</p>
<p><br /></p>
<div>On 5/6/2020 10:37 PM, Ray wrote:</div>
<blockquote type="cite" style="padding: 0 0.4em; border-left: #1010ff 2px solid; margin: 0">
<p>Spending more time on the roof, while putting more equipment and parts to meet MLPE, means more trips up the ladder, which increases, not decreases the #1 worker safety danger: Falls. Please correct me if I have somehow misunderstood this, but MLPE is not making installers safer based on OSHA information provided. Also after installation, which system is more likely to require workers to return to work on the roof, pulling up modules, trying to find problem equipment? More connections is More safe? Really? I haven't had to climb back up on the roof on any of my older, lower voltage off grid work in almost a decade.</p>
<p>Once again, MLPE has its place, (larger systems, multiple subarrays, higher voltage) but we should have sensible exemptions as have been mentioned already. We are endangering ourselves and our employees needlessly, to comply with 690.12. </p>
<pre>Ray Walters
Remote Solar
303 505-8760</pre>
<div>On 5/6/20 8:41 PM, <a href="mailto:drake.chamberlin@redwoodalliance.org">drake.chamberlin@redwoodalliance.org</a> wrote:</div>
<blockquote type="cite" style="padding: 0 0.4em; border-left: #1010ff 2px solid; margin: 0">
<p>Interestingly enough, the data on the <a href="https://www.osha.gov/pls/imis/AccidentSearch.search?p_logger=1&acc_description=&acc_Abstract=solar&acc_keyword=&sic=&naics=&Office=All&officetype=All&endmonth=05&endday=05&endyear=2002&startmonth=05&startday=05&startyear=2021&InspNr=" target="_blank" rel="noopener noreferrer">link</a> provided shows accidents from gas explosions, falls, health problems and industrial injuries. None of these incidents could have been prevented by module level power electronics. This is typical of the data that I've seen so far.</p>
<div id="gmail-m_3891093475508580951signature">---<br />
<div style="margin: 0px; padding: 0px; font-family: monospace;"> </div>
</div>
<p><br /></p>
<p id="gmail-m_3891093475508580951reply-intro">On 2020-05-06 17:22, Martin Herzfeld wrote:</p>
<blockquote style="padding: 0px 0.4em; border-left: 2px solid #1010ff; margin: 0px;">
<div id="gmail-m_3891093475508580951replybody1">
<div dir="auto">
<div dir="auto">
<div dir="auto">There could be an issue of encouraging MLPE for worker safety?</div>
<div dir="auto"> </div>
<div dir="auto">1. This is data involving incidents with workers in the OSHA Fatalities and Catastrophe Investigation Summaries found here:</div>
<div dir="auto"><a href="https://www.osha.gov/pls/imis/AccidentSearch.search?p_logger=1&acc_description=&acc_Abstract=solar&acc_keyword=&sic=&naics=&Office=All&officetype=All&endmonth=05&endday=05&endyear=2002&startmonth=05&startday=05&startyear=2021&InspNr=" target="_blank" rel="noopener noreferrer">https://www.osha.gov/pls/imis/AccidentSearch.search?p_logger=1&acc_description=&acc_Abstract=solar&acc_keyword=&sic=&naics=&Office=All&officetype=All&endmonth=05&endday=05&endyear=2002&startmonth=05&startday=05&startyear=2021&InspNr=</a></div>
<div dir="auto"> </div>
<div dir="auto">2. In the past I've observed an arc fault at the module level with traditional string systems without a listed arc-fault circuit interrupter NEC/CEC 690.11. The function in NEC/CEC 690.12 would be - to <u>reduce the shock hazard </u>- for <em>emergency responders</em> or <em>firefighters? (NEC 2020).</em> However, <span style="font-family: sans-serif;">I've observed thermal events in the panelboard with plans and workmanship issues. </span></div>
<div dir="auto"><span style="font-family: sans-serif;"> </span></div>
<div dir="auto"><span style="font-family: sans-serif;">On the other hand, falls are the #1 reason for incidents in the construction industry. </span></div>
<div dir="auto"> </div>
<div dir="auto">
<div dir="auto">All the best, <br /><br /> Martin Herzfeld, Interstate Renewable Energy Council (IREC) Certified Master Trainer ™ for Photovoltaics (PV) Installation Professional #IREC 10037<br /> Contract Training Provider (CTP)<br /> Adjunct Professor, Energy<br /><br /> California Solar & Electrical Contractor License #00833782 C46, C10, D56, D31, C-7 - Since 2004<br /> Solar, Electrical, Trenching, Pole Installation & Maintenance, Instrumentation<br /><br /> Contract Solar (PV) Technical Inspector - 3rd Party Inspections <br /> Underwriters Laboratories (UL) Certified PV Installer #17, OSHA 30<br /> OSHA-Authorized Construction Trainer #32-0105338<br /> CompTIA Certified Technical Classroom Trainer (CTT+) #T3NSZCNBBKB4QTQG<br /><br /> * Professional Member, International Association of Electrical Inspectors #7035507 - Since 2006<br /> * Accredited and Registered North American Board of Certified Energy Practitioners (NABCEP) Continuing Education (CE) Training Provider<br /> </div>
</div>
</div>
<br />
<div>
<div dir="ltr">On Thu, Apr 30, 2020, 8:29 AM <<a href="mailto:drake.chamberlin@redwoodalliance.org">drake.chamberlin@redwoodalliance.org</a>> wrote:</div>
<blockquote style="margin: 0px 0px 0px 0.8ex; border-left: 1px solid #cccccc; padding-left: 1ex;">
<div style="font-size: 10pt; font-family: Verdana,Geneva,sans-serif;">
<div id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419signature"><br />
<div>I would like to see real data on the fire risk of string inverters. Anecdotal problems are not data.</div>
<div> </div>
<div>The industry is definitely heading toward MLPE due to the rapid shutdown requirements. In many cases MLPE makes sense, in other cases it doesn't. </div>
<div> </div>
<div>Systems that are more cost effective and reliable can often be built by using string inverters.</div>
<div id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419v1signature">---</div>
<br />
<div style="margin: 0px; padding: 0px; font-family: monospace;"> </div>
</div>
<p><br /></p>
<p id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419reply-intro">On 2020-04-29 22:05, Jason Szumlanski wrote:</p>
<blockquote style="padding: 0px 0.4em; border-left: 2px solid #1010ff; margin: 0px;">
<div id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419replybody1">
<div dir="auto">
<div><span style="font-family: verdana,geneva,sans-serif; font-size: 13.3333px;">"Rapid Shutdown does not prevent fires."</span><br /><br /> Not true. If the effect of RS is to steer the market to MLPE, I believe it has a significant impact on reducing fire risk. As one who has watched a DC conductor fire smolder out of control, I am sold on an AC module or microinverter architecture. While RS on a DC array doesn't necessarily reduce fire risk within the array, it still has the potential to reduce severity and spread. Nothing is going to prevent all fires. I get that. We're talking about risk mitigation when it comes to RS. </div>
<div dir="auto"> </div>
<div dir="auto">As for "dependable string inverters," the one dependable feature is failure at least once in the module lifetime, accompanied by a shocking repair bill.</div>
<div dir="auto"> </div>
<div dir="auto">I'm not a shiny object following kind of guy, but the writing is on the wall. MLPE is the future. Modular, serviceable, disposable if you will. Like it or not, Edison is going to lose this battle to Tesla (Tom vs Nikola). And I live less than 5 minutes away from Tommy E's winter home in Fort Myers, FL. And I "grew up" in the industry living off-grid in DC power. But AC distribution wins for safety at various scales.</div>
<div dir="auto"> </div>
<div dir="auto"> </div>
<div dir="auto"> </div>
<div dir="auto"><br /><br /><br />
<div dir="auto">
<div dir="ltr">On Wed, Apr 29, 2020, 9:42 PM <<a href="mailto:drake.chamberlin@redwoodalliance.org">drake.chamberlin@redwoodalliance.org</a>> wrote:</div>
<blockquote style="margin: 0px 0px 0px 0.8ex; border-left: 1px solid #cccccc; padding-left: 1ex;">
<div style="font-size: 10pt; font-family: Verdana,Geneva,sans-serif;">
<p>Rapid Shutdown does not prevent fires; it was originally drafted to allow firefighters to vent a roof without being hindered by energized PV arrays. This rule was expanded to include other DC wiring from PV sources.</p>
<p>As for PV safety, I'd like to see some significant, statistical evidence that shows there is a major fire danger from PV relative to other sources. A fire from a solar array gets a lot more press than one from a gas leak, bad wiring or an ash tray emptied into a wastepaper basket.</p>
<p>Large public buildings should have all the protection that is available. Does one size fit all?</p>
<p>Would it be reasonable to allow residential installations under 12 kW, with 1/4 of the roof adjacent to the array available for venting, to be excepted from 690.12? What about sparsely occupied commercial buildings with ample roof area open for ventilation? </p>
<p>Many of us have chosen to work with renewable energy technology to lessen the harms caused by fossil fuel extraction and combustion. The need for non-carbon based energy sources has become extremely clear.</p>
<p>The old string inverters still chug along year after year, with little or no maintenance. Someone must pay for the ongoing maintenance of module level electronics. Dependable string inverter systems should be allowed unless statically significant danger can be demonstrated.</p>
<p>Drake</p>
<div id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419v1m_8703790999668491827m_-4822667307395758786signature">---<br />
<div style="margin: 0px; padding: 0px; font-family: monospace;"> </div>
</div>
<p><br /></p>
<p id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419v1m_8703790999668491827m_-4822667307395758786reply-intro">On 2020-04-29 16:01, Jason Szumlanski wrote:</p>
<blockquote style="padding: 0px 0.4em; border-left: 2px solid #1010ff; margin: 0px;">
<div id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419v1m_8703790999668491827m_-4822667307395758786replybody1">
<div dir="ltr">
<div dir="ltr">
<div style="font-family: arial,helvetica,sans-serif;">I have been to several PV fires for string inverter systems, both commercial and residential, and have seen many DC systems at serious risk of fires or in various stages of melted insulation and connectors. Most of these systems have exhibited good to excellent workmanship. Things just went wrong. Some were traceable to animal damage, wind, or other unmitigated factors, and some were unexplained. I disagree that there isn't justification for rapid shutdown. </div>
<div style="font-family: arial,helvetica,sans-serif;"> </div>
<div style="font-family: arial,helvetica,sans-serif;">In my opinion, what we need is some additional innovation and competition in the MLPE space. Reliability is clearly a key factor, but there is no denying that MLPE has added safety benefits among other benefits. And if you do enough volume and set up your business for efficiency (standardization of product offerings), MLPE isn't much more expensive. It becomes a negligible cost relative to the benefit. The value proposition is easy to convey. There are limits to this, but for the majority of residential and small commercial installations, MLPE has become the de facto standard around here. String inverters are dinos, and replacing 8-12 year old transformer based inverters is many times more annoying than some MLPE swaps. I will admit that the roofs around here are pretty easy to walk, so that is a factor that might not apply to you.</div>
<div style="font-family: arial,helvetica,sans-serif;"> </div>
<div style="font-family: arial,helvetica,sans-serif;">
<div>If you go under due to manufacturer product failures, you are not writing your contracts right or not charging enough for service issues beyond your control. I believe that's a red herring. You might suffer some reputation damage, but for someone that has been installing MLPE for over a decade, that is totally manageable. Consumers find a service call to replace MLPE a LOT more palatable than a surprise inverter replacement that could cost thousands of dollars. People just don't plan for that.</div>
<div> </div>
<div>Regarding rapid shutdown devices, I have also come across a few that "someone" has bypassed around here. I don't know if they were never installed properly or disabled/bypassed due to failure. It seemed suspicious to me at the time. I remember that it made me wonder what good is a rapid shutdown device if it is easily defeated? That's another argument for MLPE. It has pretty failsafe MLPE functionality.</div>
<div> </div>
<div>Jason Szumlanski</div>
<div>Florida Solar Design Group</div>
<div> </div>
</div>
<div>
<div dir="ltr">
<div dir="ltr">
<div>
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div style="text-align: center;"> </div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<br />
<div>
<div dir="ltr">On Wed, Apr 29, 2020 at 10:59 AM <<a href="mailto:drake.chamberlin@redwoodalliance.org">drake.chamberlin@redwoodalliance.org</a>> wrote:</div>
<blockquote style="margin: 0px 0px 0px 0.8ex; border-left: 1px solid #cccccc; padding-left: 1ex;">
<div style="font-size: 10pt; font-family: Verdana,Geneva,sans-serif;">
<p>Clearly, rapid shutdown increases cost and reduces reliability. Given the excellent safety record of PV, prior to rapid shutdown being required, it is unnecessary. The few anecdotal incidents of PV fires were not enough to justify the requirement, especially on smaller systems.</p>
<p>According to a friend who worked for a local installation company that went under, a big part of the reason for their failure was the chronic replacement of microinverters and optimizers.</p>
<p>What steps can be taken to create some balance in the rapid shutdown requirements that are in the NEC?</p>
<p><br /></p>
<div id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419v1m_8703790999668491827m_-4822667307395758786v1gmail-m_1345399320785373203signature">---<br />
<div style="margin: 0px; padding: 0px; font-family: monospace;"> </div>
</div>
<p><br /></p>
<p id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419v1m_8703790999668491827m_-4822667307395758786v1gmail-m_1345399320785373203reply-intro">On 2020-04-29 07:27, Sky Sims wrote:</p>
<blockquote style="padding: 0px 0.4em; border-left: 2px solid #1010ff; margin: 0px;">
<div id="gmail-m_3891093475508580951v1m_2290657155954236750m_4502811265567478132m_3712700432789776903m_-6733482047517057893m_-3407248358338594000m_5945935475487622897m_5292728194858110127m_-7102267540490521419v1m_8703790999668491827m_-4822667307395758786v1gmail-m_1345399320785373203replybody1">
<div dir="auto">So far rapid shutdown has been a nightmare. It's added a lot of cost for no measurable benefit.
<div>Using always off devices like midnight solar and Tigo makes it impossible to test open circuit voltages. Which opens the door to tons of problems when commissioning systems. </div>
<div>Also we've been trying out midnight Solar's product and have had an absurd failure rate. Which means lots of truck rolls and troubleshooting and system downtime. They send replacement product but they aren't paying for the lost weeks of productivity.</div>
<div>We have Tigo product in hand and are deciding which project to try it on. But our big concern about using it is not only the inability to confirm open circuit voltage of the strings but also the way panels bypass if the device doesn't allow the panel to connect properly. Both of these features are a recipe for problems and potential troubleshooting nightmares. The warranty from Tigo doesn't cover our expense if the product fails. And that's really what our reservations about the product boil down to right now. If we're on a job with 50 units and one fails, the contractor or the homeowner will be the ones eating the expense of finding it and replacing it. There has to be a better option. </div>
<div><br />
<div dir="ltr">Sky Sims
<div><a href="Https://EcologicalSystems.biz" target="_blank" rel="noopener noreferrer">Https://EcologicalSystems.biz</a></div>
</div>
<div dir="ltr"><br />
<blockquote style="padding: 0px 0.4em; border-left: 2px solid #1010ff; margin: 0px;">On Apr 28, 2020, at 7:46 PM, Corey Shalanski <<a href="mailto:coresolar@gmail.com">coresolar@gmail.com</a>> wrote:<br /><br /></blockquote>
</div>
<blockquote style="padding: 0px 0.4em; border-left: 2px solid #1010ff; margin: 0px;">
<div dir="ltr">
<div dir="ltr">Now that 690.12 of the <em>NEC</em> 2017 has been in effect for several years, I am curious how designers and installers are meeting the associated requirements with string inverter-based systems (*not* considering microinverters or DC optimizers). I am generally a fan of the KISS principle, and as best I can determine the <em>Tigo</em> TS4-F device is one of the simplest options currently available on the market. What are others finding?
<div> </div>
<div>I'd love to hear about favored options for complying with rapid shutdown. Any success stories? or better yet, any early failures?</div>
<div> </div>
<div>--</div>
<div>Corey Shalanski</div>
<div>Jah Light Solar</div>
<div>Portland, Jamaica</div>
</div>
<span>_______________________________________________</span><br /><span>List sponsored by Redwood Alliance</span><br /><span></span><br /><span>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a></span><br /><span></span><br /><span>Change listserver email address & settings:</span><br /><span><a href="https://mailtrack.io/trace/link/48741004c205351e1fd6a97d2252c71188d81e71?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=56977124ac95b63a" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></span><br /><span></span><br /><span>List-Archive: <a href="https://mailtrack.io/trace/link/b02b5a7da549db8b06246de6ff83408a2d397f16?url=http%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2Fmaillist.html&userId=1613865&signature=2505444a6c7e76e8" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a></span><br /><span></span><br /><span>List rules & etiquette:</span><br /><span><a href="https://mailtrack.io/trace/link/14307b48a5cf21a014a9767754fb9e3faa3e7b78?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=c9675ece76eedbfe" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a></span><br /><span></span><br /><span>Check out or update participant bios:</span><br /><span><a href="https://mailtrack.io/trace/link/917ce495ba8f7369e01489e6fbe01e0c529c5c1a?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=f07b8c2e5b7272c1" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a></span><br /><span></span></div>
</blockquote>
</div>
</div>
</div>
<br />
<div style="margin: 0px; padding: 0px; font-family: monospace;">_______________________________________________<br /> List sponsored by Redwood Alliance<br /><br /> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br /> Change listserver email address & settings:<br /><a href="https://mailtrack.io/trace/link/53e92374f477c4523c84f04b60d9235e042fe484?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=05c2b8925c2cca9b" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br /> List-Archive: <a href="https://mailtrack.io/trace/link/64b8ad23a59b7db17c7803f561209f2ec8fcd931?url=http%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2Fmaillist.html&userId=1613865&signature=851e5d5b1ad7c5c6" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br /><br /> List rules & etiquette:<br /><a href="https://mailtrack.io/trace/link/1b9d76c7044d5f000ec9d0dc76ffe05711e667c0?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=06c42b3c6357f539" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a><br /><br /> Check out or update participant bios:<br /><a href="https://mailtrack.io/trace/link/df315d52bf0b1d7387cef78766012f742e8a6642?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=c3967f238393d77c" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a><br /><br /></div>
</blockquote>
</div>
_______________________________________________<br /> List sponsored by Redwood Alliance<br /><br /> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br /> Change listserver email address & settings:<br /><a href="https://mailtrack.io/trace/link/293b35354380ac1970c6a01c39adb66144564dbf?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=733dc831fc029701" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br /> List-Archive: <a href="https://mailtrack.io/trace/link/4b39d310624bc3f043f6541c22bd38f7ae43620b?url=http%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2Fmaillist.html&userId=1613865&signature=4568169f724351ec" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br /><br /> List rules & etiquette:<br /><a href="https://mailtrack.io/trace/link/1a3c4c9b301c7d3a44855867469231a53c1de036?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=8d57f550c03f31fc" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a><br /><br /> Check out or update participant bios:<br /><a href="https://mailtrack.io/trace/link/55a1c3702348098b72ae7057204e6fe1c0ee44ad?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=81fe3e4f78a351f9" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a><br /><br /></blockquote>
</div>
<img style="display: flex;" width="0" height="0" /></div>
</div>
<br />
<div style="margin: 0px; padding: 0px; font-family: monospace;">_______________________________________________<br /> List sponsored by Redwood Alliance<br /><br /> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br /> Change listserver email address & settings:<br /><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br /> List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br /><br /> List rules & etiquette:<br /><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a><br /><br /> Check out or update participant bios:<br /><a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a><br /> Y </div>
</blockquote>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</blockquote>
</div>
_______________________________________________<br /> List sponsored by Redwood Alliance<br /><br /> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br /> Change listserver email address & settings:<br /><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br /> List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br /><br /> List rules & etiquette:<br /><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a><br /><br /> Check out or update participant bios:<br /><a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a><br /><br /></blockquote>
</div>
</div>
</div>
<br />
<div style="margin: 0px; padding: 0px; font-family: monospace;">_______________________________________________<br /> List sponsored by Redwood Alliance<br /><br /> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br /> Change listserver email address & settings:<br /><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br /> List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br /><br /> List rules & etiquette:<br /><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a><br /><br /> Check out or update participant bios:<br /><a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a><br /><br /></div>
</blockquote>
<br /><fieldset></fieldset>
<pre>_______________________________________________
List sponsored by Redwood Alliance
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a>
List rules & etiquette:
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a>
</pre>
</blockquote>
<br /><fieldset></fieldset>
<pre>_______________________________________________
List sponsored by Redwood Alliance
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a>
List rules & etiquette:
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a>
</pre>
</blockquote>
</div>
_______________________________________________<br /> List sponsored by Redwood Alliance<br /><br /> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br /> Change listserver email address & settings:<br /><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br /> List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br /><br /> List rules & etiquette:<br /><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a><br /><br /> Check out or update participant bios:<br /><a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a><br /><br /></blockquote>
</div>
<br />
<div class="pre" style="margin: 0; padding: 0; font-family: monospace">_______________________________________________<br /> List sponsored by Redwood Alliance<br /><br /> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br /> Change listserver email address & settings:<br /><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br /> List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank" rel="noopener noreferrer">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br /><br /> List rules & etiquette:<br /><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">www.re-wrenches.org/etiquette.htm</a><br /><br /> Check out or update participant bios:<br /><a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">www.members.re-wrenches.org</a><br /><br /></div>
</blockquote>
</body></html>