<div dir="ltr">Howie, <div>The timer does not reset when voltage dips below EQ, it just stops counting. So sometimes after 3 hours of EQ, the timer may have only counted down 30 minutes.</div><div><br></div><div>Jay, I did try lowering the EQ voltage. When it was set to 62V, the voltage would hover at 62.0 and 61.9, then when it was lowered to 61.6V it hovers around 61.6 and 61.5.</div><div><br></div><div>Lots of good info and ideas here, thanks all.</div><div>-Dave<br clear="all"><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div><br></div><div><b><font face="tahoma, sans-serif">Dave Tedeyan, PE</font></b></div><div><font face="tahoma, sans-serif">Senior Engineer | Taitem Engineering, PC</font></div><div><font face="tahoma, sans-serif"><img src="https://www.taitem.com/signatures/logo.png"><br></font></div><div><font face="tahoma, sans-serif">110 South Albany Street</font><span style="font-family:tahoma,sans-serif"> | Ithaca, NY 14850</span></div><div><font face="tahoma, sans-serif">o. <u>607.277.1118 x121</u> f. 607.277.2119</font></div><div><font face="tahoma, sans-serif"><a href="http://www.taitem.com" target="_blank">www.taitem.com</a></font></div><div><br></div><div><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">Solar </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">\u2022</span><span style="font-family:tahoma,sans-serif;font-size:12.5pt;line-height:17.8333px"> </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">Sustainability </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">\u2022 </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">Energy </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">\u2022 </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">Design</span><br></div><div><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px"><span style="font-family:Tahoma,sans-serif;font-size:13.3333px">Certified B-Corporation since 2013</span><span style="font-size:13.3333px"><br></span></span></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 28, 2020 at 7:46 PM jay <<a href="mailto:jay.peltz@gmail.com">jay.peltz@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div style="overflow-wrap: break-word;">Hi Dave,<div><br></div><div><div dir="ltr">Only thing I would check is to see if lowering the eq by 1 volt changes anything. IE the batteries are just struggling to keep up. </div><div dir="ltr"><br></div><div dir="ltr">But the CC should tell you what mode it\u2019s in right? IE is it regulating or is it full power. Either in the menus or just looking at VMP/watts </div><div dir="ltr"><br></div><div dir="ltr">If it\u2019s regulating then it\u2019s on the OB side </div><div dir="ltr"><br></div><div dir="ltr">If it\u2019s max power then it\u2019s on the battery side </div><div dir="ltr"><br></div><div dir="ltr">Jay Peltz</div><div><br><blockquote type="cite"><div>On Apr 28, 2020, at 6:50 AM, Dave Tedeyan <<a href="mailto:dtedeyan@taitem.com" target="_blank">dtedeyan@taitem.com</a>> wrote:</div><br><div><div dir="ltr">Hi All, <div><br></div><div>I've got an outback system (Radian 8048A, 2 FM80, 16 Trojan L16RE-B) where when the customer equalizes, the batteries hover right around the EQ voltage, but will often dip to 0.1v less. Because of this, the EQ timer does not count down properly, and so left to its own devices the system would equalize for way longer than it should, potentially forever. This will happen when doing an EQ from the solar on a bright sunny day, or the generator, or both. The customer can manually keep track of the time and manually stop the EQ after 3 hours, but that is not ideal. Has anyone dealt with this before and have any suggestions on how they fixed it? </div><div><br></div><div>This system is 3-4 years old, and the issue only started in the past year or so.</div><div><br></div><div>Cheers, </div><div>Dave</div><div><div><div dir="ltr"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div><br></div><div><b><font face="tahoma, sans-serif">Dave Tedeyan, PE</font></b></div><div><font face="tahoma, sans-serif">Senior Engineer | Taitem Engineering, PC</font></div><div><font face="tahoma, sans-serif"><img src="https://www.taitem.com/signatures/logo.png"><br></font></div><div><font face="tahoma, sans-serif">110 South Albany Street</font><span style="font-family:tahoma,sans-serif"> | Ithaca, NY 14850</span></div><div><font face="tahoma, sans-serif">o. <u>607.277.1118 x121</u> f. 607.277.2119</font></div><div><font face="tahoma, sans-serif"><a href="http://www.taitem.com/" target="_blank">www.taitem.com</a></font></div><div><br></div><div><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">Solar </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">\u2022</span><span style="font-family:tahoma,sans-serif;font-size:12.5pt;line-height:17.8333px"> </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">Sustainability </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">\u2022 </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">Energy </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">\u2022 </span><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px">Design</span><br></div><div><span style="font-family:tahoma,sans-serif;font-size:10pt;line-height:14.2667px"><span style="font-family:Tahoma,sans-serif;font-size:13.3333px">Certified B-Corporation since 2013</span><span style="font-size:13.3333px"><br></span></span></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div>
_______________________________________________<br>List sponsored by Redwood Alliance<br><br>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br><br>Change listserver email address & settings:<br><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br><br>List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br><br>List rules & etiquette:<br><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br><br>Check out or update participant bios:<br><a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br><br></div></blockquote></div><br></div></div>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>