<div dir="auto">Wrenches, Ray<div dir="auto">How do you program a FM 100 to 12 volts, l do not see that's programmable to be set to do that</div><div dir="auto">Jerry</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Apr 24, 2020, 10:16 AM Ray <<a href="mailto:ray@solarray.com">ray@solarray.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">This is a classic off grid conundrum we've dealt with for decades. <br>
Generally it take more money than the client wants to spend. 12 v is a <br>
serious limitation, not just for the PV array, but the inverter and <br>
battery layout as well. What inverter do they have? How old is it? <br>
What battery are they running? How old is the battery? What are their <br>
expansion needs? How far is grid away?<br>
<br>
I look at all these things when working with the owner of one of these <br>
legacy 12 v systems. Generally it costs serious money to rewire to <br>
higher voltage, but it usually solves multiple problems that they needed <br>
to solve anyway.<br>
<br>
On the other hand, if you want to stick with 12 v, you CAN use the FM <br>
100, and just use the MATE 3 to program the controller, then pull it. <br>
We have numerous FM 100s, and we have only one MATE 3 that lives in the <br>
shop. It brings the cost to the customer down significantly and <br>
prevents unnecessary tampering with settings. $600 for the MATE 3 is <br>
just stupid. You can buy a decent laptop for that.<br>
<br>
Ray Walters<br>
Remote Solar<br>
303 505-8760<br>
<br>
On 4/24/20 10:39 AM, Jay wrote:<br>
> Hi All,<br>
><br>
> Are there any CC out there that can parallel on the input side?<br>
><br>
> Situation is a older 12v system, 300\u2019 wire run using a MX 60.<br>
><br>
> Client wants more PV, but CC is maxed out. Upgrading to say FM-100 is way expensive and needs new mate etc.<br>
> Yes could totally redo the system to 24 or 48v and use iota for 12v loads. Buts that\u2019s expensive.<br>
><br>
> Installing new wire would be complicated and expensive. But wire is large enough to handle more power.<br>
><br>
> Are there are any cc that can parallel on the input side, which would be the easy solution if it exists<br>
><br>
> Thx<br>
><br>
> Jay<br>
> _______________________________________________<br>
> List sponsored by Redwood Alliance<br>
><br>
> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br>
><br>
> Change listserver email address & settings:<br>
> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
><br>
> List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
><br>
> List rules & etiquette:<br>
> <a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
><br>
> Check out or update participant bios:<br>
> <a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
><br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>