<div dir="ltr">If you only want to change over, why not use a contactor with three poles, a NO and NC contact? that will switch instantly. Use Utility to power the coil, it will switch to utility when the power is restored.</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Nov 26, 2019 at 2:57 AM Jerry Shafer <<a href="mailto:jerrysgarage01@gmail.com">jerrysgarage01@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">There is the SMA Automatic transfer switch if you go with the SMA battery inverter and SMA pv inverter, it can be located seperate of the battery and inverter and will take up to 30 kwhrs. of capacity <div dir="auto">Just a thought</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Nov 25, 2019, 10:52 PM Bill Hennessy <<a href="mailto:bill@berkssolar.com" target="_blank">bill@berkssolar.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div style="font-family:"Helvetica Neue",Helvetica,Arial,sans-serif;font-size:16px"><div><div dir="ltr">hi folks--</div><div dir="ltr"><br></div><div dir="ltr">We're installing a grid-tied, battery backup system on a farm where the service entrance is on a pole in the yard. At the single-phase, 240v, service entrance, there are two main breaker subpanels--one going to the house and one to the barn. The buildings are each about 100 feet away from the pole in opposite directions. The PV/battery system is located in the barn. When utility power is lost and the battery backup kicks in, we are looking for a way to bypass the house subpanel at the pole so it won't backfeed the grid. <br></div><div dir="ltr"><br></div><div dir="ltr">When the grid drops out, we need to tie the backup power coming from the barn to the line going to the house. We're thinking an automatic transfer switch installed at the pole will do the job, but the transfer switches seem to have built in delays to work with starting a generator. <span><span>The switch does not have to be service entrance rated.</span></span><br></div><div dir="ltr"><br></div><div dir="ltr">It looks like the Asco 300 series has time delay adjustments, but it is pricey and has a seven-week lead time. (Thank-you PG&E)<br></div><div dir="ltr"><br></div><div dir="ltr"><span>The battery backup system will switch over in milliseconds and we were
hoping to find something similar for the transfer operation at the pole. </span>We're looking for something simple--hopefully a basic transfer switch that will quickly switch and drop out when grid power is restored.</div><div dir="ltr"><br></div><div dir="ltr">Would appreciate any thoughts or suggestions. <br></div><div dir="ltr"><br></div><div dir="ltr"> regards, bill</div><div><br></div><div><div>Bill Hennessy<br>Berks Solar, LLC<br>371 Centennial Rd<br>Mertztown, PA 19539<br><br>o 610 682 4300<br>c 484 560 4666<br>NABCEP certified installer<br>PA contractor #44411<br><a href="http://www.berkssolar.com" rel="noreferrer" target="_blank">www.berkssolar.com</a></div></div></div></div></div>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div dir="ltr"><font color="#666666">Chris Mason</font></div><div dir="ltr"><div><span style="font-size:13px"><font color="#666666">Solar systems designer</font></span></div><div><span style="font-size:13px"><font color="#666666">Generac Generators Industrial technician</font></span></div><div><font color="#666666"><br></font></div><div><font color="#666666">Comet Systems Ltd DBA Comet Solar<br>Anguilla Cell 264.235.5670</font></div><div>WhatsApp <span style="color:rgb(102,102,102)">264.235.5670</span></div><div><font color="#666666">Skype: netconcepts</font></div><div><font color="#666666"><a href="http://www.cometenergysystems.com/" target="_blank">www.cometsolar.com</a></font></div></div></div></div>