<html><head>
</head>
<body>
<div style="font-size: 10pt;"><div dir="auto">Sounds like a job for an Arduino...</div><div dir="auto"><br></div><div><div dir="auto" font-size:9pt;"="">-Glenn</div><div dir="auto" font-size:9pt;"="">Sent from my 'smart'phone, so please excuse typos and spelling errors.</div></div></div><div style="font-size: 10pt;"><div id="LGEmailHeader" dir="auto"><div dir="auto"><br></div><div dir="auto">------ Original message------</div><div dir="auto"><b>From: </b>Mark Frye<markf@berkeleysolar.com></markf@berkeleysolar.com></div><div dir="auto"><b>Date: </b>Sat, Nov 2, 2019 1:05 PM</div><div dir="auto"><b>To: </b><a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>;</div><div dir="auto"><b>Cc: </b></div><div dir="auto"><b>Subject:</b>[RE-wrenches] Parts List For AC Couple Disconnect</div><div dir="auto"><br></div></div><pre>Folks,
Can anyone share a parts list for setting up a AC couple disconnect?
I want to couple a
non-frequency response grid-tied inverter to a
battery based stand-alone inverter.
I have only 8 amps output from the GT inverters, so can use 10A relay
contacts.
I want a device to monitor AC voltage and latch a coil on when it raises
above a set point (250VAC). I then want a timer to release the latch
after about 1 hour.
Sound about right? Are any vendors selling such a device? How about a
parts list from Digikey?
Thanks,
Mark Frye
_______________________________________________
List sponsored by Redwood Alliance
List Address:<a href="mailto: RE-wrenches@lists.re-wrenches.org"> RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
List-Archive: http<a href="mailto:://www.mail-archive.com/re-wrenches@lists.re-wrenches.org">://www.mail-archive.com/re-wrenches@lists.re-wrenches.org</a>/<a
href="http://maillist.ht">maillist.ht</a>ml
List rules & etiquette:
<a href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a>
</pre></div>
</body></html>