<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  </head>
  <body text="#000000" bgcolor="#FFFFFF">
    Several years ago I disassembled an Amphenol and a MC4 connectors to
    find for myself what the difference was. It came down to the cross
    section of the O-ring. One brand was smaller than the other. Also
    the female component that the O-ring fit into was correspondingly
    different. <br>
    So in one assembly the fit was too tight but both mismatched pieces
    would go together with extra effort while the other the o-ring did
    not fit tight enough and would snap together with normal pressure.
    It's been a number of years since I did this but I doubt that either
    manufacturer would alter anything that would make new connectors not
    compatible with older ones. <br>
    I also recall that MC was on a tear for years, especially at trade
    shows, confronting any unauthorized competitor connector maker that
    implied that theirs were compatible with MC products. <br>
    <pre class="moz-signature" cols="72"><font size="+1"><b>Jim Duncan retired...
Solar Acres Farm
817.917.0527
<a class="moz-txt-link-abbreviated" href="mailto:solarguy2004@gmail.com">solarguy2004@gmail.com</a></b></font></pre>
    <div class="moz-cite-prefix">On 8/25/2019 5:21 PM, Mark Frye wrote:<br>
    </div>
    <blockquote type="cite"
      cite="mid:975dbe59-bbe7-0f1b-aebe-2a44c121b476@berkeleysolar.com">Speaking
      of Tesla...
      <br>
      <br>
      What with Walmart and (Amazon?) suing them for PV fires...
      <br>
      <br>
      Can anyone here give a brief run down on the whole Amphenol UTX
      (?) defective or cross-mated connector story?
      <br>
      <br>
      Thanks,
      <br>
      <br>
      Mark Frye
      <br>
      <br>
      <br>
      _______________________________________________
      <br>
      List sponsored by Redwood Alliance
      <br>
      <br>
      List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
      <br>
      <br>
      Change listserver email address &amp; settings:
      <br>
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
      <br>
      <br>
      List-Archive:
<a class="moz-txt-link-freetext" href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
      <br>
      List rules &amp; etiquette:
      <br>
      <a class="moz-txt-link-abbreviated" href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a>
      <br>
      <br>
      Check out or update participant bios:
      <br>
      <a class="moz-txt-link-abbreviated" href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a>
      <br>
      <br>
    </blockquote>
    <pre class="moz-signature" cols="72">-- 

</pre>
  </body>
</html>