<div dir="auto">It is actually better for minimum shipping damage stacked on their sides. There is a right side to start removing and a really wrong side which you will know immediately! Usually marked start removing this side, follow manufacturer instruction when in doubt. I am not familiar with Mission, but others I have used stacked on their sides there is a wrap of shrink wrap between modules to contain the stack after the bands are cut. Each module is wrapped as they stack them. If you choose the wrong side the whole stack will drop. Be prepared the first time with a buddy to hold the stack just in case you choose wrong! Once you figure it out, it should be smooth sailing.<div dir="auto"><br></div><div dir="auto">Bill</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Aug 20, 2019, 6:27 PM Bill Battagin <<a href="mailto:frenergy@psln.com">frenergy@psln.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Its after hours and I need to load for tomorrow...<br>
<br>
Embarrassing question.... I finally ran out of SolarWorld PVs and just <br>
received a few pallets of Mission MSE310SQ8T PVs. They are stacked on <br>
their edges. hmmm. I took off the top cardboard, there are still 2 <br>
bands running around the 26 PVs horizontally and the cardboard around <br>
the sides. I think only those who have used Mission will know my <br>
conundrum....What's the next step?<br>
<br>
Thanks,<br>
<br>
Bill<br>
<br>
Feather River Solar Electric<br>
<br>
<br>
---<br>
This email has been checked for viruses by Avast antivirus software.<br>
<a href="https://www.avast.com/antivirus" rel="noreferrer noreferrer" target="_blank">https://www.avast.com/antivirus</a><br>
<br>
<br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>