<div dir="auto"><div style="font-family:sans-serif;font-size:12.8px" dir="auto"><div style="margin:16px 0px"><div><div dir="auto">When mounting an Envoy on the supplied DIN rail in a PVC box wired via PVC conduit, is there any requirement to accompany the conductors with a ground wire? The envoy itself does not have a ground connection and the only exposed metallic part is the DIN rail. <div dir="auto"><br></div><div dir="auto">I&#39;m thinking I need to mount a ground lug in the PVC box so the circuit conductors have a ground wire in the conduit. I have always used the IQ combiner even for larger systems because it was just easier. I&#39;m considering changing to a regular PVC junction box with just an Envoy. </div><div dir="auto"><br></div><div dir="auto">While on the subject, if there is ample space within a load center, would it be permissible to mount the Envoy right inside the enclosure? 400A plus load centers in residential settings often have a lot of empty space!</div><div dir="auto"><br></div></div></div></div><div style="height:0px"></div></div><br></div>