<div dir="ltr">Jason.<div>I had that problem with an older XW and problem was corrupted firmware. It took many years to get Schneider to admit that the problem was not my installation or programming.</div><div>New firmware fixed a nagging problem of runaway voltage and destroyed batteries. I also had found that resetting to factory defaults was causing some of the problem as the default for absorb was 6 hours instead of the one hour I or less that it should have been. Found that problem by resetting to factory defaults and then checking every setting. With the bad firmware I was seeing the charge rate and voltage setpoints totally ignored and saw battery go up to 67 volts! </div><div><br></div><div>John Blittersdorf</div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Mar 25, 2019 at 4:35 PM Jason Szumlanski <<a href="mailto:jason@floridasolardesigngroup.com">jason@floridasolardesigngroup.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">I have four inverter/chargers (master and 3 slaves) that are blowing past their 57.6V setpoint that I programmed and confirmed via the Context Combox. They are hitting 58.4V and tripping the battery management units on a set of Lithium Batts. Any ideas why this would happen? I can disable chargers on individual units, so I know the settings are getting uploaded via the Combox. <div dir="auto"><br></div><div dir="auto">Jason Szumlanski</div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>