<html><body><span style="font-family:Verdana; color:#000000; font-size:10pt;"><div>Jay,</div><div><br></div><div>I have not seen this, yet.</div><div>If you go into the Magnums remote and look at AC meter does the meter reflect what your are seeing on your volt meter?</div><div>(I am guessing that you see this on your volt meter)</div><div><br></div><div>If this is a "AC coupling feature" then the user should be able to enable this for AC coupling and disable if not.</div><div>The factory setting should be disabled.</div><div><br></div><div>If this is a real feature and the user can not enable/disable I think it was not thought out well.</div><div><br></div><div>Louis.</div>
<blockquote id="replyBlockquote" webmail="1" style="border-left: 2px solid blue; margin-left: 8px; padding-left: 8px; font-size:10pt; color:black; font-family:verdana;">
<div id="wmQuoteWrapper">
-------- Original Message --------<br>
Subject: [RE-wrenches] Magnum inverter issue<br>
From: Jay <<a href="mailto:jay.peltz@gmail.com">jay.peltz@gmail.com</a>><br>
Date: Wed, December 12, 2018 6:14 pm<br>
To: <a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a><br>
<br>
Hi all,<br>
<br>
I\u2019ve had the following issue with a new PAE 4024. <br>
<br>
It\u2019s ac voltage will rise and fall about 10+ volts ( 124-115) over about 10 seconds like clock work. Regardless of the load, or battery SOC/voltage. <br>
I checked with a local shop, they also have the issue. They checked all their back stock and they all did the same thing. However they had an older one, say 6 months old that didn\u2019t do it. Nor do any of my previous magnum installs do this. <br>
<br>
Clients are not too thrilled with this as lights go up and down in brightness. <br>
<br>
Magnum\u2019s response was that this is normal for an off grid inverter and that somehow this \u201cfeature\u201d has to do with it being able to AC couple better. <br>
<br>
I\u2019m writing to ask if others have seen this as well and more importantly if anyone has a fix?<br>
<br>
Thanks,<br>
<br>
Jay<br>
Peltz Power<br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a><br>
<br>
</div>
</blockquote></span></body></html>