<div dir="auto">Wrenches<div dir="auto">I can only use Outback as a reference, is the programming set to search not on,</div><div dir="auto">What happens under a light load, l have seen cycling on Outbacks that had low idle load and were programmed to high and they hunted like that.</div><div dir="auto">Jerry</div></div><br><div class="gmail_quote"><div dir="ltr">On Wed, Dec 12, 2018, 7:16 PM Jay &lt;<a href="mailto:jay.peltz@gmail.com">jay.peltz@gmail.com</a> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi all,<br>
<br>
I\u2019ve had the following issue with a new PAE 4024. <br>
<br>
It\u2019s ac voltage will rise and fall about 10+ volts ( 124-115) over about 10 seconds like clock work. Regardless of the load, or battery SOC/voltage. <br>
I checked with a local shop, they also have the issue. They checked all their back stock and they all did the same thing. However they had an older one, say 6 months old that didn\u2019t do it. Nor do any of my previous magnum installs do this. <br>
<br>
Clients are not too thrilled with this as lights go up and down in brightness. <br>
<br>
Magnum\u2019s response was that this is normal for an off grid inverter and that somehow this \u201cfeature\u201d has to do with it being able to AC couple better. <br>
<br>
I\u2019m writing to ask if others have seen this as well and more importantly if anyone has a fix?<br>
<br>
Thanks,<br>
<br>
Jay<br>
Peltz Power<br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address &amp; settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules &amp; etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>