<div dir="ltr"><div>They do not spill liquid when turned up side down, the valve only opens on high pressure. But there could be free liquid inside that would escape if they are broken. When I hired a couple of strong guys to move mine into place we tried using the eye and a bar through it, but that did not work well. One would need to find a way to prevent the eye from sliding on the bar. A bloody hand was had by one of the guys. They ended up using a hand truck. The attached document shows that you can tilt them up to 45° for up to one hour. My eye has moved on, I think I bought it from McMaster-Carr. I had to get a male threaded eye and coupling nut, they did not have a female threaded eye that fit. <br></div><div><br></div><div>The cell packs also make good shop weights, very flat on bottom, just don't drop them. I kept a few for the purpose.</div><div><br></div><div>Brad<br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Jul 26, 2018 at 5:00 PM, Rick Brown <span dir="ltr"><<a href="mailto:rick@solshineenergyalternatives.com" target="_blank">rick@solshineenergyalternatives.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto">Quite resourceful, Brad. <br><br><div id="m_5201514952969120649AppleMailSignature"><span style="background-color:rgba(255,255,255,0)">rick brown<br>SolShine Energy Alternatives, LLC<br>Electrical & Solar Contracting Services<br><a dir="ltr" href="http://www.SolShineEnergyAlternatives.com" target="_blank">www.<wbr>SolShineEnergyAlternatives.com</a><br>Check, Virginia 24072<br><a dir="ltr" href="tel:540.808.9502" target="_blank">540.808.9502</a><br><br>VA Class A Contractor Lic# 2705147660<br>VA Master Electrician Lic# 2710062762<br>VA Alternative Energy Systems Installer <br>NABCEP Certified PV Installation Professional 110112-21</span></div><div><div class="h5"><div><br>On Jul 26, 2018, at 6:54 PM, Bradley Bassett <<a href="mailto:bbassett2@gmail.com" target="_blank">bbassett2@gmail.com</a>> wrote:<br><br></div><blockquote type="cite"><div><div dir="ltr"><div>I was lucky that my local county Hazo-house took a look at the MSDS and said drop them off. The person there saw my big MSDS printout and said uh oh, but then she knew just where to look and said fine no problem drop them off. Too bad not everyone is that knowledgeable about what they are looking at.</div><div><br></div><div>These are so much easier to move when you take them apart too. 30 lbs cell blocks. Then you have some interesting parts to do something with. Attached is a photo of my Super Aquion Gravel Tamper tool. Some of the other aluminum parts will get incorporated into one of my homemade telescopes.<br></div><div><br></div><div>Brad</div><div>AEE Solar<br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Jul 25, 2018 at 4:22 PM, Glenn Burt <span dir="ltr"><<a href="mailto:glenn.burt@glbcc.com" target="_blank">glenn.burt@glbcc.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div link="blue" vlink="purple" lang="EN-US"><div class="m_5201514952969120649m_-4108817682055721014WordSection1"><p class="MsoNormal">Howdy wrenches,<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Does anyone have any experience with disposing of the Aqueon battery stacks?<u></u><u></u></p><p class="MsoNormal">We have a number that have failed and our local waste station is balking, regardless of how much hand-holding we provide and specifications, MSDS and manufacturer info we supply.<u></u><u></u></p><p class="MsoNormal">We have been referred to the state Environmental Conservation Agency and they are discussing haz-mat and recycling requirements with no understanding of their components.<u></u><u></u></p><p class="MsoNormal">Any suggestions, recommendations or experience with recycling/disposing of these batteries?<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Thanks,<u></u><u></u></p><p class="MsoNormal">Glenn<u></u><u></u></p></div></div><br>______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.<wbr>org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/o<wbr>ptions.cgi/re-wrenches-re-wren<wbr>ches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re<wbr>-wrenches@lists.re-wrenches.or<wbr>g/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.<wbr>htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div>
</div></blockquote></div></div><blockquote type="cite"><div><Aq GT sm.jpg></div></blockquote><span class=""><blockquote type="cite"><div><span>______________________________<wbr>_________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.<wbr>org</a></span><br><span></span><br><span>Change listserver email address & settings:</span><br><span><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/<wbr>options.cgi/re-wrenches-re-<wbr>wrenches.org</a></span><br><span></span><br><span>List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/<wbr>re-wrenches@lists.re-wrenches.<wbr>org/maillist.html</a></span><br><span></span><br><span>List rules & etiquette:</span><br><span><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.<wbr>htm</a></span><br><span></span><br><span>Check out or update participant bios:</span><br><span><a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a></span><br><span></span><br></div></blockquote></span></div><br>______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.<wbr>org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/<wbr>options.cgi/re-wrenches-re-<wbr>wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/<wbr>re-wrenches@lists.re-wrenches.<wbr>org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.<wbr>htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div>