<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
  </head>
  <body text="#000000" bgcolor="#FFFFFF">
    <p>We've welded a flanged plate to the bottom of the pole and then
      set epoxy anchor bolts into the rock.  Another option we've tried
      is drill a 8" hole into the rock to get the base of the pole a
      foot down into the rock and then poured a reinforced block of
      concrete on top of the rock.  smaller holes were drilled into the
      surrounding rock to attach the concrete to the rock as well.  <br>
    </p>
    <p>Ballasted systems could be an option, as well as low profile
      racking with multiple anchor points.  Not fun but it can be done. 
      <br>
    </p>
    <p>Ray Walters<br>
    </p>
    <br>
    <div class="moz-cite-prefix">On 4/12/18 7:27 AM, Aaron Mandelkorn
      wrote:<br>
    </div>
    <blockquote type="cite"
cite="mid:CALVx-tX2KubvUXdkRDyJjHzhBN3_LYnfyLug_mYA72Wk02+USA@mail.gmail.com">
      <div dir="auto">Hi all,
        <div dir="auto"><br>
        </div>
        <div dir="auto">I have a customer that requires a mounting
          option I have yet to encounter.  His site sits on top of of a
          massive hill of granite.  It is relatively flat.  Are there
          any mounting options that could work here?  We are only
          talking about (12) to (16) modules for an off grid array.  Is
          there anything that can bolt to rock?  I typically use dpw or
          Mt solar pole mounts but can't imagine how these options could
          work.  Any thoughts? <br>
          <br>
          <div data-smartmail="gmail_signature" dir="auto">Aaron
            Mandelkorn<br>
            President / Founder<br>
            Renewable Energy Outfitters<br>
            <a href="http://www.reosolar.com" moz-do-not-send="true">www.reosolar.com</a><br>
            Off Grid Depot<br>
            <a href="http://www.offgridnow.com" moz-do-not-send="true">www.offgridnow.com</a><br>
            970-596-3744<br>
            <br>
                </div>
        </div>
      </div>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <br>
      <pre wrap="">_______________________________________________
List sponsored by Redwood Alliance

List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>

Change listserver email address &amp; settings:
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>

List-Archive: <a class="moz-txt-link-freetext" href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a>

List rules &amp; etiquette:
<a class="moz-txt-link-abbreviated" href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a>

Check out or update participant bios:
<a class="moz-txt-link-abbreviated" href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a>

</pre>
    </blockquote>
    <br>
  </body>
</html>