<div dir="ltr">Ray, <div>Standing seam roofs are easier when it comes to fall protection than a trapezoidal style metal roof which there </div><div>are tons of in upstate NY... For a standing seam roof, they make anchors that will attach to the seam. When the</div><div>job is done, they can be removed and reused. We have a few of these:</div><div><a href="https://www.fallprotectionpros.com/guardian-two-way-standing-seam-roof-anchor.html">https://www.fallprotectionpros.com/guardian-two-way-standing-seam-roof-anchor.html</a><br></div><div><br></div><div>Cheers, </div><div>Dave</div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><br></div><div><b><font face="arial, helvetica, sans-serif">--</font></b></div><div><b><font face="arial, helvetica, sans-serif"><br></font></b></div><div><b><font face="arial, helvetica, sans-serif">Dave Tedeyan</font><br></b></div><div><b>Senior Engineer</b></div><div><br></div><div><b>Taitem Engineering, PC</b></div><div>10 Verizon Lane, Lansing, NY 14882</div><div><font color="#000000">Voice: <a value="+16072771118">(607) 930-3481 x6</a></font></div><div><a href="http://www.taitem.com/" target="_blank"><font color="#000000">www.taitem.com</font></a></div></div></div></div></div></div></div></div>
<br><div class="gmail_quote">On Sat, Mar 31, 2018 at 1:19 PM, Ray <span dir="ltr"><<a href="mailto:ray@solarray.com" target="_blank">ray@solarray.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div text="#000000" bgcolor="#FFFFFF">
<p>Hi Bill;</p>
<p>Not to hijack the thread, but how did you handle fall protection
and work safely on that 12:12 pitch metal roof? I have a steep
standing seam roof project coming up. We wanted to set a ledger
board on S5 clips, but were worried they would leave visible
damage to the new roof. <br>
</p>
<p>Thanks</p>
<p>Ray Walters</p>
<p>Remote Solar<br>
</p><div><div class="h5">
<br>
<div class="m_-1746300998519208657moz-cite-prefix">On 3/31/18 11:00 AM, Bill Hoffer wrote:<br>
</div>
<blockquote type="cite">
<div dir="auto">Jay
<div dir="auto">Just finished using S5PV railess on standing
seam roof 12x12 pitch. Worked great, but wire management was
challenging with minimal clearance under modules. Had to
think ahead to make it work. And still was a struggle. I
also used 6 rather then 4 per module to even out the loads on
the roof panels. I feel confident that it is solid, but I
know how the roof was connected to include proper clip spacing
and screw size for maximum wind load here in the Columbia
Gorge and proper tacking of the top of the panel under the
ridge to prevent sliding down. If I had it to do over I would
however have used rails to make wire management easier!</div>
<div dir="auto"><br>
</div>
<div dir="auto">Bill</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr">On Fri, Mar 30, 2018, 6:03 PM jay <<a href="mailto:jay.peltz@gmail.com" rel="noreferrer" target="_blank">jay.peltz@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">HI All,<br>
<br>
I\u2019ve got a client who is set on wanting to do rail less
racking. I\u2019m just working with him on overall design, hes
doing the work.<br>
<br>
Its not a large system. 16 modules on two roof orientations,
( 4 on one, 12 on the other) with offset modules. Standing
metal seam roof that is being installed with solar in mind,
lots of fasteners.<br>
<br>
Hes very competent and pays attention to details.<br>
<br>
Any positive/negative recommendations.<br>
<br>
thanks in advance,<br>
<br>
jay<br>
<br>
peltz power<br>
<br>
<br>
______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.<wbr>org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/<wbr>options.cgi/re-wrenches-re-<wbr>wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.mail-archive.com/<wbr>re-wrenches@lists.re-wrenches.<wbr>org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer noreferrer" target="_blank">www.re-wrenches.org/etiquette.<wbr>htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer
noreferrer noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote>
</div>
<br>
<fieldset class="m_-1746300998519208657mimeAttachmentHeader"></fieldset>
<br>
<pre>______________________________<wbr>_________________
List sponsored by Redwood Alliance
List Address: <a class="m_-1746300998519208657moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.<wbr>org</a>
Change listserver email address & settings:
<a class="m_-1746300998519208657moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/<wbr>options.cgi/re-wrenches-re-<wbr>wrenches.org</a>
List-Archive: <a class="m_-1746300998519208657moz-txt-link-freetext" href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/<wbr>re-wrenches@lists.re-wrenches.<wbr>org/maillist.html</a>
List rules & etiquette:
<a class="m_-1746300998519208657moz-txt-link-abbreviated" href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.<wbr>htm</a>
Check out or update participant bios:
<a class="m_-1746300998519208657moz-txt-link-abbreviated" href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a>
</pre>
</blockquote>
<br>
</div></div></div>
<br>______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.<wbr>org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/<wbr>options.cgi/re-wrenches-re-<wbr>wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/<wbr>re-wrenches@lists.re-wrenches.<wbr>org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.<wbr>htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div>