<div dir="auto">I have also used the sunmoto mounts with the multiple holes. They are called the AL shoe I believe. It makes a great alternative to the DPW ez foot which are very expensive and take forever to receive. We but butal mastic tape on the back. Just like the ez foot. <br><br><div data-smartmail="gmail_signature">Aaron Mandelkorn<br>President / Founder<br>Renewable Energy Outfitters<br><a href="http://www.reosolar.com">www.reosolar.com</a><br>Off Grid Depot<br><a href="http://www.offgridnow.com">www.offgridnow.com</a><br>970-596-3744<br><br> </div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mar 3, 2018 5:54 PM, "August Goers" <<a href="mailto:august@luminalt.com">august@luminalt.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto">Hi All - We tie into TJIs commonly, if you Google "TJI solar" you'll find manufacturer docs on how to properly lag in.<div dir="auto"><br></div><div dir="auto">August</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mar 2, 2018 1:24 PM, "Jerry Caldwell" <<a href="mailto:solarcowboy@yahoo.com" target="_blank">solarcowboy@yahoo.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div style="font-family:Helvetica Neue,Helvetica,Arial,sans-serif;font-size:13px"><div>Dear Wrenches,</div><div><br></div><div>I have a customer with a low slope roof supported by TJI beams. Does anyone have experience permitting and installing on TJIs? I'm curious if jurisdictions are requiring Structural Engineer stamps. </div><div><br></div><div>Since the top chord of the beams is only 1 3/8" thick should we be using shorter lag bolts for these installations? It also seems that it would be undesirable to penetrate into the web of the beam.</div><div><br></div><div>Any advice would be appreciated here.</div><div><br></div><div>Thank you,</div><div><br></div><div>Jerry Caldwell<br></div></div></div><br>______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: RE-wrenches@lists.re-wrenches.<wbr>org<br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/" target="_blank">http://lists.re-wrenches.org/</a>o<wbr>ptions.cgi/re-wrenches-re-<a href="http://wrenches.org" target="_blank">wren<wbr>ches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/" target="_blank">http://www.mail-archive.com/</a>re<wbr>-wrenches@lists.re-wrenches.or<wbr>g/maillist.html<br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette" target="_blank">www.re-wrenches.org/etiquette</a>.<wbr>htm<br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div></div>
<br>______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.<wbr>org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/<wbr>options.cgi/re-wrenches-re-<wbr>wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/<wbr>re-wrenches@lists.re-wrenches.<wbr>org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.<wbr>htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div></div>