<div dir="ltr">Hi Folks.....Outback no longer supports AC coupling on their Radian systems. My understanding is that it is because of the unreliability of the ROCB (remote operated circuit breaker) they were using. I have heard that they are imminently going to release a white paper about AC coupling using a solid state relay instead. I was wondering if any of you have done this? Do you have any advice about the settings for the Auxiliary output settings that control the relay? Looking for programming advice on the mate 3. I talked to Outback today and they said until the white paper is released they won't be giving instructions or advice on this capability. They did tell me not to use the AC couple mode already programmed into the mate 3 auxiliary output control. <div>Thanks in advance for any advice! On or off list!!</div><div>Cheers.</div><div><br><div><div><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Sunny Regards,<br>Kirpal Khalsa</div><div dir="ltr">Oregon LRT#25<br>NABCEP Certified PV Installation Professional<br>Oregon Solarworks LLC<br><a href="http://www.oregonsolarworks.com" target="_blank">www.oregonsolarworks.com</a><br>541-299-0402</div></div></div></div></div></div></div>
</div></div></div></div>